Ana içeriğe geç

Giriş

The back plate of this watch can be replaced if it becomes scratched or is broken. It is able to be replaced very easily. The process includes using a screwdriver to remove the four screws on the back plate. Then a new back plate can be added in place of the old one.

Parçalar

Hiçbir parça belirtilmedi.

  1. Wedge a plastic opening tool between band contacts.
    • Wedge a plastic opening tool between band contacts.

  2. Push in plastic opening tool until the components click and pop out of the holder.
    • Push in plastic opening tool until the components click and pop out of the holder.

    • Repeat steps for other band.

  3. Remove four 4mm screws using a PH000 screwdriver.
    • Remove four 4mm screws using a PH000 screwdriver.

    • Remove back plate.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Kaitlyn Lee

Üyelik tarihi: 06-11-2017

518 İtibar

4 adet Kılavuz yazıldı

Takım

IUPUI, Team S6-G1, Baechle Fall 2017 IUPUI, Team S6-G1, Baechle Fall 2017 üyesi

IUPUI-BAECHLE-F17S6G1

4 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 7

Her zaman: 80