Eşyalarını Tamir Et Topluluğa Katılın Mağaza

Basis B1 Band Battery Replacement

Giriş

The battery can go bad on many devices. This guide includes removing the back plate and then detaching the battery from the rest of the watch.

What you need

  1. Basis B1 Band Battery Replacement, Watch Strap: adım 1, 1 resimden 1.

    • Wedge a plastic opening tool between band contacts.

    Düzenle

  2. Basis B1 Band Battery Replacement: adım 2, 1 resimden 1.

    • Push in plastic opening tool until the components click and pop out of the holder.

    • Repeat steps for other band.

    Düzenle

  4. Basis B1 Band Battery Replacement, Back Plate: adım 3, 1 resimden 1.

    • Remove four 4mm screws using a PH000 screwdriver.

    • Remove back plate.

    Düzenle

  5. Basis B1 Band Battery Replacement, Battery: adım 4, 1 resimden 1.

    • Use tweezers to remove elastomeric, or zebra, connector.

    Düzenle

  6. Basis B1 Band Battery Replacement: adım 5, 2 resimden 1. Basis B1 Band Battery Replacement: adım 5, 2 resimden 2.

    • Use the flat end of the spudger to carefully lift the battery until adhesive seal is broken.

    Düzenle

  7. Basis B1 Band Battery Replacement: adım 6, 1 resimden 1.

    • Use the pointy edge of the spudger tool to detach battery leads from the circuit board.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Kaitlyn Lee

Üyelik tarihi: 11/06/17

518 İtibar

4 adet Kılavuz yazıldı

Badges: 7

+4 tane daha rozet

Team

IUPUI, Team S6-G1, Baechle Fall 2017 IUPUI, Team S6-G1, Baechle Fall 2017 üyesi

IUPUI-BAECHLE-F17S6G1

4 Üyeler

4 adet Kılavuz yazıldı

0 Comments

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 5

Her zaman: 137