Ana içeriğe geç

Giriş

This guide will help you replace the buttons in the remote control of your Beiens Cartoon RC Race Car.

Parçalar

Hiçbir parça belirtilmedi.

  1. Hold the remote control with the backside facing you and, using the Phillips #00 screwdriver, unscrew the six  6.5 mm screws on the back of the controller that hold it together.
    • Hold the remote control with the backside facing you and, using the Phillips #00 screwdriver, unscrew the six 6.5 mm screws on the back of the controller that hold it together.

  2. iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now

    iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now
  3. Open the remote control and remove the blue plastic buttons from inside.
    • Open the remote control and remove the blue plastic buttons from inside.

  4. Place the new buttons inside their slots in the remote control.
    • Place the new buttons inside their slots in the remote control.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Amber Ashley

Üyelik tarihi: 01-10-2015

329 İtibar

4 adet Kılavuz yazıldı

Takım

USF Tampa, Team 1-6, Leahy Fall 2015 USF Tampa, Team 1-6, Leahy Fall 2015 üyesi

USFT-LEAHY-F15S1G6

3 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 169