Eşyalarını Tamir Et Topluluk Mağaza

Bem Wireless HL2739B Charging base motherboard Replacement

Giriş

Is your charging base not functioning correctly? It's probably the motherboard.

Neye ihtiyacın var

  1. Bem Wireless HL2739B Charging base motherboard Replacement, Charging Base Battery: adım 1, 1 resimden 1.

    • Peel the rubber cover back from the corner of the auxiliary charging base to reveal the screw.

    Düzenle

  2. Bem Wireless HL2739B Charging base motherboard Replacement: adım 2, 2 resimden 1. Bem Wireless HL2739B Charging base motherboard Replacement: adım 2, 2 resimden 2.

    • Use the J1 bit attached to the screwdriver to remove the four 10mm screws from the bottom of the auxiliary charging base.

    Düzenle

  4. Bem Wireless HL2739B Charging base motherboard Replacement: adım 3, 1 resimden 1.

    • Lift the bottom cover away from the rest of the auxiliary charging base.

    • There are wires connecting the battery and cover to the rest of the auxiliary charging base. Be careful when removing the auxiliary charging base cover.

    Düzenle

  5. Bem Wireless HL2739B Charging base motherboard Replacement: adım 4, 2 resimden 1. Bem Wireless HL2739B Charging base motherboard Replacement: adım 4, 2 resimden 2.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Using the tweezers, pull the wires from the auxiliary charging base's internal chip.

    • Be careful not to damage the chip when you remove the wires.

    • It will likely require soldering to reassemble the auxiliary charging base after this step.

    Düzenle

  6. Bem Wireless HL2739B Charging base motherboard Replacement, Charging Base Motherboard: adım 5, 1 resimden 1.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Using tweezers, remove the black wire from the motherboard

    Düzenle

  7. Bem Wireless HL2739B Charging base motherboard Replacement: adım 6, 1 resimden 1.

    • Using the plastic opening tool, gently pry the motherboard up and remove it from the charging base.

    • There are no screws to be removed from the motherboard.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Ryan McQueeney

Üyelik tarihi: 02/28/17

446 İtibar

4 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

USF Tampa, Team S2-G4, Nance Spring 2017 USF Tampa, Team S2-G4, Nance Spring 2017 üyesi

USFT-NANCE-S17S2G4

4 Üyeler

5 adet Kılavuz yazıldı

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 20

Her zaman: 582