Ana içeriğe geç

Giriş

Bionaire BAP 600 Transformer Replacement

Parçalar

Hiçbir parça belirtilmedi.

  1. Unplug 7 pin connector
    • Unplug 7 pin connector

  2. Unplug 2 pin wires which connects the front LED's.
    • Unplug 2 pin wires which connects the front LED's.

  3. Remove  two screws Remove  two screws
    • Remove two screws

  4. Unplug pins
    • Unplug pins

    • Use scissors to cut zip ties

  5. Unplug rest of pin connections Remove  Neutral and Hot wires They are the two black wires
    • Unplug rest of pin connections

    • Remove Neutral and Hot wires

    • They are the two black wires

    • Pull them out

  6. Unscrew two screws Inspect capacitor for any bulges ( if it has a bulge , it means it is need to be replaced) Check for burnt solder in the back of circuit board
    • Unscrew two screws

    • Inspect capacitor for any bulges ( if it has a bulge , it means it is need to be replaced)

    • Check for burnt solder in the back of circuit board

  7. Use screwdriver to remove screws Use screwdriver to remove screws
    • Use screwdriver to remove screws

Sonuç

To reassemble your device, follow these instructions in reverse order.

Alexander Tarancon

Üyelik tarihi: 12-10-2016

1 İtibar

2 adet Kılavuz yazıldı

Takım

IUPUI, Team 4-4, Baechle Fall 2016 IUPUI, Team 4-4, Baechle Fall 2016 üyesi

IUPUI-BAECHLE-F16S4G4

5 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 2

Her zaman: 86