Eşyalarını Tamir Et Topluluk Mağaza

Bissell Bolt ION 2-in-1 Cordless Brush Replacement

Giriş

This guide will detail each step necessary to replace the brush roll on a Bissell Bolt ION 2-in-1 Cordless vacuum.

  1. Bissell Bolt ION 2-in-1 Cordless Brush Replacement, Brush Roll: adım 1, 3 resimden 1. Bissell Bolt ION 2-in-1 Cordless Brush Replacement, Brush Roll: adım 1, 3 resimden 2. Bissell Bolt ION 2-in-1 Cordless Brush Replacement, Brush Roll: adım 1, 3 resimden 3.

    • Push the release button on the back side of the device near the swivel head, to detach the swivel for convenient access to the brush roll.

    Düzenle

  3. Bissell Bolt ION 2-in-1 Cordless Brush Replacement: adım 2, 3 resimden 1. Bissell Bolt ION 2-in-1 Cordless Brush Replacement: adım 2, 3 resimden 2. Bissell Bolt ION 2-in-1 Cordless Brush Replacement: adım 2, 3 resimden 3.

    • The guard notch will automatically be down in the locked position.

    • Slide the guard notch to the unlocked position.

    Düzenle

  4. Bissell Bolt ION 2-in-1 Cordless Brush Replacement: adım 3, 2 resimden 1. Bissell Bolt ION 2-in-1 Cordless Brush Replacement: adım 3, 2 resimden 2.

    • Lift up the latch to the right of the guard notch to access the brush.

    • While holding up the latch remove the brush.

    • Hold up latch to place new brush roll back into place.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Benjamin Bautista

Üyelik tarihi: 09/11/17

140 İtibar

1 Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

CSU Fullerton, Team S1-G3, Bruce Fall 2017 CSU Fullerton, Team S1-G3, Bruce Fall 2017 üyesi

CSUF-BRUCE-F17S1G3

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 8

Her zaman: 701