Eşyalarını Tamir Et Topluluk Mağaza

Bissell OptiClean Cyclonic Vacuum Nozzle Replacement

Giriş

The vacuum comes with three hose attachments. To clean or remove blockages from hose attachments, it may be necessary to remove the hose and wand attachments.

  1. Bissell OptiClean Cyclonic Vacuum Nozzle Replacement, Nozzle: adım 1, 1 resimden 1.

    • Place the vacuum upright and locate the nozzle attachment you want removed.

    Düzenle

  3. Bissell OptiClean Cyclonic Vacuum Nozzle Replacement: adım 2, 2 resimden 1. Bissell OptiClean Cyclonic Vacuum Nozzle Replacement: adım 2, 2 resimden 2.

    • Slide the attachment off of the end of the wand.

    Düzenle

  4. Bissell OptiClean Cyclonic Vacuum Nozzle Replacement: adım 3, 2 resimden 1. Bissell OptiClean Cyclonic Vacuum Nozzle Replacement: adım 3, 2 resimden 2.

    • The brush nozzle attachment has two parts, which can be separated and replaced.

    • The front of the vacuum has slots to hold up to two vacuum attachments. To store, simply place the attachment in the framed slots.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

1 tane daha katılımcı ile

Jorden Carroll

Üyelik tarihi: 01/18/18

227 İtibar

1 Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

Cal Poly, Team S12-G1, Banghart Winter 2018 Cal Poly, Team S12-G1, Banghart Winter 2018 üyesi

CPSU-BANGHART-W18S12G1

5 Üyeler

5 adet Kılavuz yazıldı

Bir Yorum

- good job team

Austin Marshall - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 3

Her zaman: 211