Eşyalarını Tamir Et Topluluk Mağaza

Bissell Pet Hair Eraser Motorized Brush Belt Replacement

Giriş

Occasionally, the motorized brush can stop functioning due to a failure in the belt. This guide shows how to replace the belt inside the motorized brush.

Neye ihtiyacın var

  1. Bissell Pet Hair Eraser Motorized Brush Belt Replacement, Motorized Brush: adım 1, 2 resimden 1. Bissell Pet Hair Eraser Motorized Brush Belt Replacement, Motorized Brush: adım 1, 2 resimden 2.

    • Turn power OFF.

    • Detach motorized brush from the vacuum.

    Düzenle

  2. Bissell Pet Hair Eraser Motorized Brush Belt Replacement: adım 2, 2 resimden 1. Bissell Pet Hair Eraser Motorized Brush Belt Replacement: adım 2, 2 resimden 2.

    • Use a spudger or a coin to turn the circular lock clockwise to unlock the brush roll.

    • Remove the lock cover.

    Düzenle

  3. Bissell Pet Hair Eraser Motorized Brush Belt Replacement: adım 3, 1 resimden 1.

    • Lift brush out of the enclosure.

    Düzenle

  5. Bissell Pet Hair Eraser Motorized Brush Belt Replacement: adım 4, 3 resimden 1. Bissell Pet Hair Eraser Motorized Brush Belt Replacement: adım 4, 3 resimden 2. Bissell Pet Hair Eraser Motorized Brush Belt Replacement: adım 4, 3 resimden 3.

    • Remove the four 13.0 mm Phillips #0 screws and remove the green cover.

    Düzenle

  6. Bissell Pet Hair Eraser Motorized Brush Belt Replacement: adım 5, 1 resimden 1.

    • Take out the motor assembly.

    Düzenle

  7. Bissell Pet Hair Eraser Motorized Brush Belt Replacement, Motorized Brush Belt: adım 6, 1 resimden 1.

    • Take the belt off the gear by using a spudger.

    Düzenle

  8. Bissell Pet Hair Eraser Motorized Brush Belt Replacement: adım 7, 3 resimden 1. Bissell Pet Hair Eraser Motorized Brush Belt Replacement: adım 7, 3 resimden 2. Bissell Pet Hair Eraser Motorized Brush Belt Replacement: adım 7, 3 resimden 3.

    • Grab the new belt and slide it on to the two gears.

    • Place the motor assembly back into the motorized brush enclosure.

    Düzenle
Sonuç

To reassemble your device, follow the motorized brush disassembly instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Roman Dyagilev

Üyelik tarihi: 11/11/17

217 İtibar

2 adet Kılavuz yazıldı

Rozetler: 3

Ekip

IUPUI, Team S4-G4, Wilson Fall 2017 IUPUI, Team S4-G4, Wilson Fall 2017 üyesi

IUPUI-WILSON-F17S4G4

3 Üyeler

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 4

Her zaman: 406