Eşyalarını Tamir Et Topluluk Mağaza

Bissell Powerglide Cordless Release Button Replacement

Giriş

This guide explains how to replace the release button if it is broken or not working.

Neye ihtiyacın var

  1. Bissell Powerglide Cordless Release Button Replacement, Release Button: adım 1, 2 resimden 1. Bissell Powerglide Cordless Release Button Replacement, Release Button: adım 1, 2 resimden 2.

    • Press the release button while pulling up on the head of the vacuum to remove the head.

    Düzenle

  2. Bissell Powerglide Cordless Release Button Replacement: adım 2, 1 resimden 1.

    • Using a Phillips head screwdriver, unscrew the four screws holding the panel to the shaft of the vacuum.

    Düzenle

  4. Bissell Powerglide Cordless Release Button Replacement: adım 3, 2 resimden 1. Bissell Powerglide Cordless Release Button Replacement: adım 3, 2 resimden 2.

    • Pry the panel up using a spudger and pull up firmly just enough to see the clips of wire on the sides.

    Düzenle

  5. Bissell Powerglide Cordless Release Button Replacement: adım 4, 1 resimden 1.

    • Remove the wire clips on both sides of the shaft.

    Düzenle

  6. Bissell Powerglide Cordless Release Button Replacement: adım 5, 1 resimden 1.

    • Pull the top piece out of the shaft.

    Düzenle

  7. Bissell Powerglide Cordless Release Button Replacement: adım 6, 3 resimden 1. Bissell Powerglide Cordless Release Button Replacement: adım 6, 3 resimden 2. Bissell Powerglide Cordless Release Button Replacement: adım 6, 3 resimden 3.

    • Pinch the two pairs of plastic catches (circled in the picture) to release the button.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Khanh Fleshman

Üyelik tarihi: 01/28/18

133 İtibar

1 Kılavuz yazıldı

Rozetler: 3

Ekip

CPSU-BANGHART-W18S21G2 CPSU-BANGHART-W18S21G2 üyesi

Community

1 Üye

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 5

Her zaman: 151