Eşyalarını Tamir Et Topluluk Mağaza

Bissell Zing 2156A Rear Wheel Replacement

Giriş

Like most canister vacuums, this unit uses wheels to help keep it mobile for a variety of floor types. The Bissell Zing 2156A uses three total wheels: one swivel wheel in front and two side wheels. If the vacuum's wheels are stuck, replacing these can be a great way to get it going again.

Hair or other debris can get behind these wheels, and by their nature, these wheels are often right where messes are, so gloves might be advisable. Otherwise, this is an easy repair!

  1. Bissell Zing 2156A Rear Wheel Replacement, Rear Wheel: adım 1, 1 resimden 1.

    • Remove the dust tank, so the vacuum can lie upside down easily.

    • Press the grey button while pulling up.

    Düzenle

  3. Bissell Zing 2156A Rear Wheel Replacement: adım 2, 1 resimden 1.

    • Flip the vacuum upside down.

    Düzenle

  4. Bissell Zing 2156A Rear Wheel Replacement: adım 3, 3 resimden 1. Bissell Zing 2156A Rear Wheel Replacement: adım 3, 3 resimden 2. Bissell Zing 2156A Rear Wheel Replacement: adım 3, 3 resimden 3.

    • Place your hand inside between the wheel and vacuum and pry the wheel off.

    • Repeat with the other side.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

4 tane daha katılımcı ile

Terrance

Üyelik tarihi: 02/14/24

280 İtibar

3 adet Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

University of Memphis, Team 3-4, Sneed Spring 2024 University of Memphis, Team 3-4, Sneed Spring 2024 üyesi

UM-SNEED-S24S3G4

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 4

Son 30 gün: 17

Her zaman: 53