Eşyalarını Tamir Et Topluluk Mağaza

Black and Decker BL3000S Blender Blades Replacement

Giriş

This installation guide will help you separate the blades from the blender jar. Once separated, you can successfully install replacements blades or to check for any malfunctions with the blades.

  1. Black and Decker BL3000S Blender Blades Replacement, Blender Blades: adım 1, 1 resimden 1.

    • Make sure the blender is turned off and unplugged from all power.

    • Remove the glass jar from the base of the blender.

    Düzenle

  2. Black and Decker BL3000S Blender Blades Replacement: adım 2, 1 resimden 1.

    • Remove the top lid from the blender jar.

    Düzenle

  4. Black and Decker BL3000S Blender Blades Replacement: adım 3, 1 resimden 1.

    • Twist the plastic base of the jar counterclockwise to remove it from the glass upper half.

    • Take care not to cut yourself on the blades.

    Düzenle

  5. Black and Decker BL3000S Blender Blades Replacement: adım 4, 1 resimden 1.

    • Lift the rubber washer straight up to remove it from the blade assembly.

    • Take care not to cut yourself on the blades.

    Düzenle

  6. Black and Decker BL3000S Blender Blades Replacement: adım 5, 1 resimden 1.

    • Lift the blades from the bottom cap.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Andrew

Üyelik tarihi: 10/04/12

209 İtibar

4 adet Kılavuz yazıldı

Rozetler: 10

+7 tane daha rozet

Ekip

Cal Poly, Team 6-34, Regan Fall 2012 Cal Poly, Team 6-34, Regan Fall 2012 üyesi

CPSU-REGAN-F12S6G34

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 11

Son 30 gün: 46

Her zaman: 5,662