Eşyalarını Tamir Et Topluluk Mağaza

Black and Decker BL3000S Motor Fan Replacement

Giriş

Upon completion of this guide, you can successfully install and replace the motor fan for you blender.

Neye ihtiyacın var

  1. Black and Decker BL3000S Motor Fan Replacement, Blender Base: adım 1, 2 resimden 1. Black and Decker BL3000S Motor Fan Replacement, Blender Base: adım 1, 2 resimden 2.

    • Before disassembling the blender base, make sure the blender disconnected from any power outlet.

    • Lift the jar straight up from the base without tilting the jar.

    Düzenle

  2. Black and Decker BL3000S Motor Fan Replacement: adım 2, 1 resimden 1.

    • Remove the top three 1/4 inch base screws using a Philip's head screwdriver.

    Düzenle

  3. Black and Decker BL3000S Motor Fan Replacement: adım 3, 2 resimden 1. Black and Decker BL3000S Motor Fan Replacement: adım 3, 2 resimden 2.

    • Remove the two base leg covers next to the power cord using pliers or a flat-head screwdriver.

    • This provides access to the base screws beneath.

    Düzenle

  5. Black and Decker BL3000S Motor Fan Replacement: adım 4, 1 resimden 1.

    • Remove the following screws that secure the top and bottom halves of the base.

    • One 1/4 Phillips screw

    • One TA-20 screw

    • Both screwdrivers must have a minimum of a three inch shank (length).

    • Screwdrivers with extenders will not fit down the access holes.

    Düzenle

  6. Black and Decker BL3000S Motor Fan Replacement: adım 5, 1 resimden 1.

    • Lift the top half of the base from the bottom half of the base to reveal the internal mechanism.

    Düzenle

  7. Black and Decker BL3000S Motor Fan Replacement, Motor Fan: adım 6, 2 resimden 1. Black and Decker BL3000S Motor Fan Replacement, Motor Fan: adım 6, 2 resimden 2.

    • Using pliers, remove the top nut from the fan and remove the washer.

    • Use a small towel to hold the fan in place. This makes taking off the nut easier to do.

    Düzenle

  8. Black and Decker BL3000S Motor Fan Replacement: adım 7, 1 resimden 1.

    • Lift the fan blades from the blender base.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Andrew

Üyelik tarihi: 10/04/12

209 İtibar

4 adet Kılavuz yazıldı

Rozetler: 10

+7 tane daha rozet

Ekip

Cal Poly, Team 6-34, Regan Fall 2012 Cal Poly, Team 6-34, Regan Fall 2012 üyesi

CPSU-REGAN-F12S6G34

4 Üyeler

6 adet Kılavuz yazıldı

Bir Yorum

mon mixeur a montre des itincelles et de la fumeé quel étape puis suivre pour le réparer

abdelkarim hassi - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 15

Son 30 gün: 56

Her zaman: 4,443