Eşyalarını Tamir Et Topluluk Mağaza

Black and Decker DCM100R Heating Element Replacement

Giriş

This guide will show you how to replace the heating element of the Black and Decker DCM100 Coffeemaker line. The guide is intended to help resolve water not warming to the desired temperature or at the expected speed. Before starting this guide, please see the trouble shooting page to help fix any other possible issues first.

Neye ihtiyacın var

  1. Black and Decker DCM100R Heating Element Replacement, Heating Element: adım 1, 2 resimden 1. Black and Decker DCM100R Heating Element Replacement, Heating Element: adım 1, 2 resimden 2.

    • Turn the coffee maker on its side.

    • Remove the four 6 mm Phillips #2 that secure the baseplate.

    Düzenle

  2. Black and Decker DCM100R Heating Element Replacement: adım 2, 3 resimden 1. Black and Decker DCM100R Heating Element Replacement: adım 2, 3 resimden 2. Black and Decker DCM100R Heating Element Replacement: adım 2, 3 resimden 3.

    • Insert the jimmy at the back of the panel and slide it around to the front.

    Düzenle

  3. Black and Decker DCM100R Heating Element Replacement: adım 3, 3 resimden 1. Black and Decker DCM100R Heating Element Replacement: adım 3, 3 resimden 2. Black and Decker DCM100R Heating Element Replacement: adım 3, 3 resimden 3.

    • Apply pressure to the backside of the panel until it releases.

    • Remove the plate.

    Düzenle

  5. Black and Decker DCM100R Heating Element Replacement: adım 4, 2 resimden 1. Black and Decker DCM100R Heating Element Replacement: adım 4, 2 resimden 2.

    • Remove the two 10 mm Phillips #2 screws securing the metal support brace.

    • Remove the brace and set aside.

    Düzenle

  6. Black and Decker DCM100R Heating Element Replacement: adım 5, 2 resimden 1. Black and Decker DCM100R Heating Element Replacement: adım 5, 2 resimden 2.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Pull back the tubing and wiring to reveal the hot plate.

    • To hold these out of your way, you can use the Nylon Tipped Tweezers to pin them back to the back panel.

    Düzenle

  7. Black and Decker DCM100R Heating Element Replacement: adım 6, 2 resimden 1. Black and Decker DCM100R Heating Element Replacement: adım 6, 2 resimden 2.

    • Use a Phillips #2 screwdriver to remove the five 8 mm screws that secure the mounting bracket and hot plate.

    Düzenle

  8. Black and Decker DCM100R Heating Element Replacement: adım 7, 2 resimden 1. Black and Decker DCM100R Heating Element Replacement: adım 7, 2 resimden 2.

    • Use a pair of pliers to gently pull the mounting bracket out of place.

    Düzenle

  9. Black and Decker DCM100R Heating Element Replacement: adım 8, 3 resimden 1. Black and Decker DCM100R Heating Element Replacement: adım 8, 3 resimden 2. Black and Decker DCM100R Heating Element Replacement: adım 8, 3 resimden 3.

    • Remove the hot plate from the mounting bracket.

    • Remove the O-ring from the hot plate.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 4

Son 30 gün: 19

Her zaman: 128