Ana içeriğe geç

Black and Decker BDH9600CHV Power Switch Replacement

Neye ihtiyacın var

  1. Black and Decker BDH9600CHV Power Switch Replacement, Power Switch: adım 1, 3 resimden 1. Black and Decker BDH9600CHV Power Switch Replacement, Power Switch: adım 1, 3 resimden 2. Black and Decker BDH9600CHV Power Switch Replacement, Power Switch: adım 1, 3 resimden 3.
    • To remove the filter and housing, press the green button labeled "Filter".

  2. Black and Decker BDH9600CHV Power Switch Replacement: adım 2, 1 resimden 1.
    • Unscrew and remove all 5 screws using the Phillips 0 screw bit. Each screw is 17.5 mm long.

  3. Black and Decker BDH9600CHV Power Switch Replacement: adım 3, 2 resimden 1. Black and Decker BDH9600CHV Power Switch Replacement: adım 3, 2 resimden 2.
    • Pull the housing apart.

    • When you pull the housing apart, pieces may fall out. Be sure to track of the parts and where they go.

    • Remove the switch by pulling it out.

  4. Black and Decker BDH9600CHV Power Switch Replacement: adım 4, 2 resimden 1. Black and Decker BDH9600CHV Power Switch Replacement: adım 4, 2 resimden 2.
    • Replace the new switch by sliding the replacement switch onto the top of the switch mechanism located on the motor.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Ivette Muzquiz

Üyelik tarihi: 11/06/17

349 İtibar

3 adet Kılavuz yazıldı

Ekip

IUPUI, Team S1-G4, Harley Fall 2017 IUPUI, Team S1-G4, Harley Fall 2017 üyesi

IUPUI-HARLEY-F17S1G4

3 Üyeler

3 adet Kılavuz yazıldı

Bir Yorum

My switch with up & down button box like

Fernando Palacios - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 5

Her zaman: 1,111