Eşyalarını Tamir Et Topluluk Mağaza

Black and Decker FT1000 Type 1 Blower Switch Replacement

Giriş

Black and Decker only replaces the switch with a complete motor, so this guide will replace the switch with a commonly available switch.

Neye ihtiyacın var

  1. Black and Decker FT1000 Type 1 Blower Switch Replacement, Black and Decker FT1000 Blower: adım 1, 2 resimden 1. Black and Decker FT1000 Type 1 Blower Switch Replacement, Black and Decker FT1000 Blower: adım 1, 2 resimden 2.

    • This is the blower. I have removed the nozzle and strap.

    Düzenle

  2. Black and Decker FT1000 Type 1 Blower Switch Replacement: adım 2, 1 resimden 1.

    • Remove Screws.

    Düzenle

  3. Black and Decker FT1000 Type 1 Blower Switch Replacement: adım 3, 1 resimden 1.

    • Remove rear cover. It helps to hold the plug tight to the front housing so the wires stay in place.

    Düzenle

  4. Black and Decker FT1000 Type 1 Blower Switch Replacement: adım 4, 3 resimden 1. Black and Decker FT1000 Type 1 Blower Switch Replacement: adım 4, 3 resimden 2. Black and Decker FT1000 Type 1 Blower Switch Replacement: adım 4, 3 resimden 3.

    • Notice the switch is fine, it's simply the plastic armature that is broken.

    • The broken piece is only included with the motor and switch.

    Düzenle

  6. Black and Decker FT1000 Type 1 Blower Switch Replacement: adım 5, 1 resimden 1.

    • This switch is easy to find. It's just a single position single throw switch.

    • I was able to buy it at a home improvement store for $4.00.

    • It even fits nicely in the cutout for the original switch/armature.

    Düzenle

  7. Black and Decker FT1000 Type 1 Blower Switch Replacement: adım 6, 3 resimden 1. Black and Decker FT1000 Type 1 Blower Switch Replacement: adım 6, 3 resimden 2. Black and Decker FT1000 Type 1 Blower Switch Replacement: adım 6, 3 resimden 3.

    • Remove the switch/armature.

    • Remove the tension plate (the metal piece).

    • Put in the switch. The terminals are at a bad angle, so we will bend them to fit.

    Düzenle

  8. Black and Decker FT1000 Type 1 Blower Switch Replacement: adım 7, 2 resimden 1. Black and Decker FT1000 Type 1 Blower Switch Replacement: adım 7, 2 resimden 2.

    • Bend slowly and carefully.

    • Try it in and see how well it fits. It might need some tweaking.

    Düzenle

  9. Black and Decker FT1000 Type 1 Blower Switch Replacement: adım 8, 2 resimden 1. Black and Decker FT1000 Type 1 Blower Switch Replacement: adım 8, 2 resimden 2.

    • Now remove the actual electrical switch. No need to worry about the wiring, its just open and closed.

    Düzenle

  10. Black and Decker FT1000 Type 1 Blower Switch Replacement: adım 9, 1 resimden 1.

    • The black wire gets a new wider terminal and just plugs on.

    • The other wire needs to be a bit longer, so it gets an extension and a new terminal.

    • I used simple crimp on terminals and splice.

    Düzenle

  11. Black and Decker FT1000 Type 1 Blower Switch Replacement: adım 10, 2 resimden 1. Black and Decker FT1000 Type 1 Blower Switch Replacement: adım 10, 2 resimden 2.

    • There was not enough room for the terminal to pass by the plastic housing. I just removed a little and then routed the black wire under the switch.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Scot Henderson

Üyelik tarihi: 05/18/15

857 İtibar

2 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

3 Yorum

This works great. Thank you.

JFGuerrero - Yanıt

Scot,

Thanks so much for your excellent information!!! The exact same part broke on mine today. I looked at your outstanding detail on what to do. I looked through my stash of stuff and found a toggle switch just like the one you showed but from a different manufacturer. I just got done putting it in as you described and it is better than new now. Works like a champ!

Thanks so much,

John Brodrecht

Casper, WY

John Brodrecht - Yanıt

This was an excellent post with the perfect amount of detail and clear pictures!

I only wish you had the wiring part in the same detail because I think my wiring is faulty. I will look for your posts again for guidance. Thanks

Julie - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 8

Son 30 gün: 35

Her zaman: 3,364