Eşyalarını Tamir Et Topluluk Mağaza

Black and Decker G48TD Disassembly

Giriş

Full Device Name: Black and Decker 3-in-1 Grill - Griddle - Waffle Maker

Model Name: G48TD

This guide aims to disassemble the device into its fundamental components.

Safety warnings:

  • Do not operate on device while it is receiving power
  • Be careful when bending sharp metal tabs

No special skills are required for following this guide

Neye ihtiyacın var

  1. Black and Decker G48TD Disassembly, Black and Decker G48TD Disassembly: adım 1, 2 resimden 1. Black and Decker G48TD Disassembly, Black and Decker G48TD Disassembly: adım 1, 2 resimden 2.

    • Open the grill.

    Düzenle

  2. Black and Decker G48TD Disassembly: adım 2, 3 resimden 1. Black and Decker G48TD Disassembly: adım 2, 3 resimden 2. Black and Decker G48TD Disassembly: adım 2, 3 resimden 3.

    • Remove the top and bottom griddle plates.

    Düzenle

  3. Black and Decker G48TD Disassembly: adım 3, 3 resimden 1. Black and Decker G48TD Disassembly: adım 3, 3 resimden 2. Black and Decker G48TD Disassembly: adım 3, 3 resimden 3.

    • Use a pair of Large Needle Nosed Pliers to twist the metal tabs holding the plate housing the bottom heating element connections and remove the plate.

    Düzenle

  4. Black and Decker G48TD Disassembly: adım 4, 3 resimden 1. Black and Decker G48TD Disassembly: adım 4, 3 resimden 2. Black and Decker G48TD Disassembly: adım 4, 3 resimden 3.

    • Use a pair of Large Needle Nosed Pliers to twist the metal tabs holding the plate housing the top heating element connections and remove the plates.

    Düzenle

  5. Black and Decker G48TD Disassembly: adım 5, 3 resimden 1. Black and Decker G48TD Disassembly: adım 5, 3 resimden 2. Black and Decker G48TD Disassembly: adım 5, 3 resimden 3.

    • Use pliers to twist the metal tabs holding down the thermostat housing.

    Düzenle

  7. Black and Decker G48TD Disassembly: adım 6, 2 resimden 1. Black and Decker G48TD Disassembly: adım 6, 2 resimden 2.

    • Use a 4 mm Flathead screwdriver to remove the 11.4 mm screw in the back of the thermostat housing.

    Düzenle

  8. Black and Decker G48TD Disassembly: adım 7, 2 resimden 1. Black and Decker G48TD Disassembly: adım 7, 2 resimden 2.

    • Lift up the thermostat housing and detach it from the temperature control arm, then remove the washers at the end of the temperature control arm.

    Düzenle

  9. Black and Decker G48TD Disassembly: adım 8, 2 resimden 1. Black and Decker G48TD Disassembly: adım 8, 2 resimden 2.

    • Remove the thermostat housing.

    Düzenle

  10. Black and Decker G48TD Disassembly: adım 9, 2 resimden 1. Black and Decker G48TD Disassembly: adım 9, 2 resimden 2.

    • Remove the thermostat housing springs.

    Düzenle

  11. Black and Decker G48TD Disassembly: adım 10, 2 resimden 1. Black and Decker G48TD Disassembly: adım 10, 2 resimden 2.

    • Bend up the brackets holding down the heating elements.

    Düzenle

  12. Black and Decker G48TD Disassembly: adım 11, 2 resimden 1. Black and Decker G48TD Disassembly: adım 11, 2 resimden 2.

    • Remove the heating elements from their respective housings (the bottom one is not able to be removed completely as it is fused to a piece of metal).

    Düzenle

  13. Black and Decker G48TD Disassembly: adım 12, 2 resimden 1. Black and Decker G48TD Disassembly: adım 12, 2 resimden 2.

    • Remove the housing from the wiring along the bottom of the grill.

    Düzenle

  14. Black and Decker G48TD Disassembly: adım 13, 1 resimden 1.

    • The device is fully disassembled!

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 11

Her zaman: 387