Eşyalarını Tamir Et Topluluk Mağaza

Black and Decker JS660 Blade Holder Replacement

Giriş

The jigsaw blade may become loose or is not fastening correctly when using the blade. This guide will identify the problem and show the user how to fix and interchange the holder.

Neye ihtiyacın var

  1. Black and Decker JS660 Blade Holder Replacement, Base: adım 1, 2 resimden 1. Black and Decker JS660 Blade Holder Replacement, Base: adım 1, 2 resimden 2.

    • Unscrew the eight screws to open up the jigsaw.

    Düzenle

  2. Black and Decker JS660 Blade Holder Replacement: adım 2, 1 resimden 1.

    • Use a screwdriver to remove the first screws securing the base to the jigsaw.

    • Remove the second screw.

    • Remove the base of the jigsaw.

    Düzenle

  4. Black and Decker JS660 Blade Holder Replacement: adım 3, 2 resimden 1. Black and Decker JS660 Blade Holder Replacement: adım 3, 2 resimden 2.

    • With the old jigsaw base off, replace it with the new base by following the steps in the reverse order.

    • Assemble the base on a steady surface.

    Düzenle

  5. Black and Decker JS660 Blade Holder Replacement, Blade Holder: adım 4, 2 resimden 1. Black and Decker JS660 Blade Holder Replacement, Blade Holder: adım 4, 2 resimden 2.

    • You will need to take out the entire blade clamp shown.

    • The plastic part is fragile, easy to break

    Düzenle

  6. Black and Decker JS660 Blade Holder Replacement: adım 5, 3 resimden 1. Black and Decker JS660 Blade Holder Replacement: adım 5, 3 resimden 2. Black and Decker JS660 Blade Holder Replacement: adım 5, 3 resimden 3.

    • Showing the entire blade clamp removed from the device.

    • Apply some oil grease if dry/needed

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Andrew Khouri

Üyelik tarihi: 02/08/16

468 İtibar

4 adet Kılavuz yazıldı

Rozetler: 11

+8 tane daha rozet

Ekip

USF Tampa, Team 6-2, Eyestone Spring 2016 USF Tampa, Team 6-2, Eyestone Spring 2016 üyesi

USFT-EYESTONE-S16S6G2

4 Üyeler

4 adet Kılavuz yazıldı

Bir Yorum

What a great website… I could never have known how to replace the blade holder… Or that I could get the correct parts…I got the replacement part. Then removed the old one, and replaced the new one. NO problem at all.. Thanks to Andrew and this website… With out it, would have to pay some one at a big price, and wait to have it fixed, as would have to send it off for the repair.. Or….. Just throw it away…

Thanks every one… I will share this site for sure…

navy1aedon - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 7

Son 30 gün: 24

Her zaman: 3,356