Eşyalarını Tamir Et Topluluk Mağaza

Black and Decker JS660 Blade Holder Replacement

Giriş

This guide will show you how to remove the entire blade holder assembly if it were to ever get broken.

Neye ihtiyacın var

  1. Black and Decker JS660 Blade Holder Replacement, Housing Disassembly: adım 1, 2 resimden 1. Black and Decker JS660 Blade Holder Replacement, Housing Disassembly: adım 1, 2 resimden 2.

    • Remove the nine torx 15.875mm screws on the front of the jigsaw using a T-15 torx screwdriver.

    Düzenle

  3. Black and Decker JS660 Blade Holder Replacement: adım 2, 1 resimden 1.

    • By separating the two housing halves, carefully remove the top plate.

    Düzenle

  4. Black and Decker JS660 Blade Holder Replacement, Blade Holder: adım 3, 1 resimden 1.

    • Being careful to keep all parts together, grab the entire assembly and pull it directly out of the saw.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

matt murray

Üyelik tarihi: 01/27/17

682 İtibar

6 adet Kılavuz yazıldı

Rozetler: 11

+8 tane daha rozet

Ekip

Cal Poly, Team 22-9, Maness Winter 2017 Cal Poly, Team 22-9, Maness Winter 2017 üyesi

CPSU-MANESS-W17S22G9

4 Üyeler

7 adet Kılavuz yazıldı

Bir Yorum

Why dose it keep throw the blade off

Delores Torres - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 16

Her zaman: 3,485