Eşyalarını Tamir Et Topluluk Mağaza

Black and Decker LDX 120C Gear Replacement

Giriş

If the drill isn't working effectively it might be because of the gears, so this guide will show a step by step process on how to access the gear and to change necessary components.

Neye ihtiyacın var

  1. Black and Decker LDX 120C Gear Replacement, Outer Case: adım 1, 1 resimden 1.

    • For this guide we will need to use a 1.0 mm phillips #1 screw.

    • There are a total of thirteen screws that need to be removed in order to open the drill and access the interior components.

    Düzenle

  2. Black and Decker LDX 120C Gear Replacement: adım 2, 1 resimden 1.

    • Remove the four screws on the back top side of the drill.

    Düzenle

  3. Black and Decker LDX 120C Gear Replacement: adım 3, 1 resimden 1.

    • Remove the four screws that connect the chuck to the drill.

    Düzenle

  4. Black and Decker LDX 120C Gear Replacement: adım 4, 1 resimden 1.

    • Remove the five screws on the front side of the drill.

    Düzenle

  5. Black and Decker LDX 120C Gear Replacement: adım 5, 1 resimden 1.

    • Gently grab both sides of the drill casing, and separate both sides from each other.

    Düzenle

  6. Black and Decker LDX 120C Gear Replacement: adım 6, 1 resimden 1.

    • At this point you should be able to separate both as illustrated.

    Düzenle

  8. Black and Decker LDX 120C Gear Replacement: adım 7, 1 resimden 1.

    • Now all the components of the drill are visible and can be accessed.

    Düzenle

  9. Black and Decker LDX 120C Gear Replacement, Gear: adım 8, 1 resimden 1.

    • After following the prerequisite guide you will be able to access the interior components of the drill.

    Düzenle

  10. Black and Decker LDX 120C Gear Replacement: adım 9, 1 resimden 1.

    • Gently remove the top part (motor and chuck) from the rest of the drill.

    Düzenle

  11. Black and Decker LDX 120C Gear Replacement: adım 10, 1 resimden 1.

    • Make sure you do that with care so that the connection doesn't get damaged.

    Düzenle

  12. Black and Decker LDX 120C Gear Replacement: adım 11, 1 resimden 1.

    • To be able to get into the gears you will need to separate the motor from the rest.

    • And then you will be able to access the gears which is located between the motor and the chuck.

    Düzenle

  13. Black and Decker LDX 120C Gear Replacement: adım 12, 1 resimden 1.

    • Twist the gauge to change between the gear.

    • If you don't hear a clicking sound then check the gears.

    Düzenle

  14. Black and Decker LDX 120C Gear Replacement: adım 13, 1 resimden 1.

    • Twist the gear and see if the three gears rotate without jamming.

    Düzenle

  15. Black and Decker LDX 120C Gear Replacement: adım 14, 1 resimden 1.

    • Check if any gear is chipped or broken in any way.

    • If it is then you will need to change the broken gear.

    Düzenle

  16. Black and Decker LDX 120C Gear Replacement: adım 15, 1 resimden 1.

    • Using the spudger place it under the gear as illustrated.

    Düzenle

  17. Black and Decker LDX 120C Gear Replacement: adım 16, 1 resimden 1.

    • The gear will remove with just a little amount of force.

    Düzenle

  18. Black and Decker LDX 120C Gear Replacement: adım 17, 1 resimden 1.

    • The gear has been removed and now can be replaced by another gear.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

jeffrey zakka

Üyelik tarihi: 02/09/16

735 İtibar

6 adet Kılavuz yazıldı

Rozetler: 14

+11 tane daha rozet

Ekip

USF Tampa, Team 11-5, Cheng Spring 2016 USF Tampa, Team 11-5, Cheng Spring 2016 üyesi

USFT-CHENG-S16S11G5

5 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 17

Her zaman: 1,952