Aletler

Hiçbir alete gerek yok.

Parçalar

Hiçbir parçaya gerek yok.

  1. To take off the nozzle, filter, and catch bowl first start off by pushing in the button identified with a red square and twist that part of the device toward the handle portion of the vacuum and it should click and pop off the chassis. To take off the nozzle, filter, and catch bowl first start off by pushing in the button identified with a red square and twist that part of the device toward the handle portion of the vacuum and it should click and pop off the chassis.
    • To take off the nozzle, filter, and catch bowl first start off by pushing in the button identified with a red square and twist that part of the device toward the handle portion of the vacuum and it should click and pop off the chassis.

  2. Once the nozzle, filter and dust bowl have been removed each part can be removed from the nozzle section of the device. Once the nozzle, filter and dust bowl have been removed each part can be removed from the nozzle section of the device.
    • Once the nozzle, filter and dust bowl have been removed each part can be removed from the nozzle section of the device.

  3. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Remove the three screws. Remove the three screws.
    • Remove the three screws.

  5. Flip the hand vac over and remove two screws. Flip the hand vac over and remove two screws.
    • Flip the hand vac over and remove two screws.

  6. Once you have successfully unscrewed the five screws holding the cover on you should be able to take the cover off. Remove the L-shaped plastic hook. Once the L shaped hook has been removed the motor will easily fall out of place.
    • Once you have successfully unscrewed the five screws holding the cover on you should be able to take the cover off.

    • Remove the L-shaped plastic hook.

    • Once the L shaped hook has been removed the motor will easily fall out of place.

    • Once the motor has been removed from its home the two wires that are giving it power can easily be removed by pulling on them carefully.

    • This will then allow for you to replace the motor.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 2

Her zaman: 54