Eşyalarını Tamir Et Topluluk Mağaza

Black and Decker PS1800 Chuck Replacement

Giriş

This guide will show you how to replace the Black and Decker PS1800's chuck.

Neye ihtiyacın var

  1. Black and Decker PS1800 Chuck Replacement, Chuck: adım 1, 2 resimden 1. Black and Decker PS1800 Chuck Replacement, Chuck: adım 1, 2 resimden 2.

    • Using the T20 Torx Security screwdriver, take out the 2.3 mm screw inside the chuck.

    Düzenle

  3. Black and Decker PS1800 Chuck Replacement: adım 2, 2 resimden 1. Black and Decker PS1800 Chuck Replacement: adım 2, 2 resimden 2.

    • Set the drill to 'drill mode' and tighten the chuck with the Allen wrench in it.

    • 'Drill mode' is represented by the drill bit symbol

    • Use the Allen wrench to unscrew the chuck by rotating it counter clockwise.

    Düzenle

  4. Black and Decker PS1800 Chuck Replacement: adım 3, 1 resimden 1.

    • Remove the chuck completely by unscrewing it in a counter clockwise direction.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

6 tane daha katılımcı ile

David Nawl

Üyelik tarihi: 10/19/16

237 İtibar

2 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

IUPUI, Team 2-3, Baechle Fall 2016 IUPUI, Team 2-3, Baechle Fall 2016 üyesi

IUPUI-BAECHLE-F16S2G3

5 Üyeler

6 adet Kılavuz yazıldı

Bir Yorum

Is the torx screw right or left hand thread

andrewaporter - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 8

Her zaman: 2,720