Eşyalarını Tamir Et Topluluk Mağaza

Black and Decker Pivot Plus PD600 Pivot Button Disassembly

Giriş

This guide will walk you through the process of removing the pivot button on the Black and Decker Pivot Plus PD600.

The pivot button may need to be removed and checked for contaminants if problems such as jamming of the button occur.

No special skills or tools are required for this disassembly.

Neye ihtiyacın var

  1. Black and Decker Pivot Plus PD600 Pivot Button Disassembly, Black and Decker Pivot Plus PD600 Pivot Button Disassembly: adım 1, 2 resimden 1. Black and Decker Pivot Plus PD600 Pivot Button Disassembly, Black and Decker Pivot Plus PD600 Pivot Button Disassembly: adım 1, 2 resimden 2.

    • Locate the pivot button screw labeled with a lock symbol.

    • Remove the screw with a Phillips #1 screwdriver.

    Düzenle

  3. Black and Decker Pivot Plus PD600 Pivot Button Disassembly: adım 2, 2 resimden 1. Black and Decker Pivot Plus PD600 Pivot Button Disassembly: adım 2, 2 resimden 2.

    • Set the screw to the side.

    • Remove both sides of the button from the screwdriver.

    • You will be left with three pieces: a black piece with a lock on the front, a circular orange piece, and a spring.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

10 tane daha katılımcı ile

Ryan Angelich

Üyelik tarihi: 05/13/13

101 İtibar

1 Kılavuz yazıldı

Rozetler: 2

Ekip

Cal Poly, Team 4-15, Maness Spring 2013 Cal Poly, Team 4-15, Maness Spring 2013 üyesi

CPSU-MANESS-S13S4G15

5 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 8

Her zaman: 1,131