Eşyalarını Tamir Et Topluluk Mağaza

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Black and Decker TR1278B Bread Grabber Spring Replacement

Giriş

This is a replacement guide for the bread grabber springs on the Black and Decker TR1278B.

Neye ihtiyacın var

  1. Black and Decker TR1278B Bread Grabber Spring Replacement, Top Cover: adım 1, 1 resimden 1.

    • Unplug the toaster before disassembly.

    • Remove the carriage lever by pulling it away from the toaster.

    Düzenle

  2. Black and Decker TR1278B Bread Grabber Spring Replacement: adım 2, 1 resimden 1.

    • Toaster will be turned upside down. Clear crumb tray or work over a paper towel.

    • Turn the toaster upside down.

    • Unscrew all four 4mm screws on the bottom using a Phillip's head #2 (PH2) screwdriver.

    • Or a slightly different model has six screws that require an allen wrench (hex key). Ones that have a ball end will not work. I had to use one that had more of a Star of David, pointy pattern to it.

    Düzenle

  3. Black and Decker TR1278B Bread Grabber Spring Replacement: adım 3, 1 resimden 1.

    • Detach the bottom from the front cover using the plastic opening tool.

    Düzenle

  5. Black and Decker TR1278B Bread Grabber Spring Replacement: adım 4, 1 resimden 1.

    • Turn the toaster right side up.

    • Support the bottom. The ribbon cable that connects the toaster to the front cover can be damaged.

    • Lift the front cover.

    • Lift carefully. Again the ribbon cable can be damaged.

    Düzenle

  6. Black and Decker TR1278B Bread Grabber Spring Replacement: adım 5, 1 resimden 1.

    • Detach the bundled cable connector from the toaster by carefully pulling it away from the circuit board.

    Düzenle

  7. Black and Decker TR1278B Bread Grabber Spring Replacement, Bread Grabber Spring: adım 6, 1 resimden 1.

    • Locate the spring

    Düzenle

  8. Black and Decker TR1278B Bread Grabber Spring Replacement: adım 7, 1 resimden 1.

    • Press down on the toaster lever to gain access to the grabber spring located behind the large metal plate.

    • Use metal spudger to loosen clamps on spring.

    Düzenle

  9. Black and Decker TR1278B Bread Grabber Spring Replacement: adım 8, 1 resimden 1.

    • Use needle nose tweezers to pull the spring off of its hook.

    • Repeat this step for the opposite side.

    Düzenle

  10. Black and Decker TR1278B Bread Grabber Spring Replacement: adım 9, 1 resimden 1.

    • Remove the old spring from the toaster unit to insert the new one.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Brea-Monique

Üyelik tarihi: 02/15/17

351 İtibar

3 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

USF Tampa, Team 8-1, Eyestone Spring 2017 USF Tampa, Team 8-1, Eyestone Spring 2017 üyesi

USFT-EYESTONE-S17S8G1

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 6

Son 30 gün: 14

Her zaman: 1,189