Eşyalarını Tamir Et Topluluk Mağaza

Black and Decker WP900 Exterior Casing Replacement

Giriş

This page gives instructions for disassembling the Black and Decker WP900 6-Inch Orbital Waxer and Polisher to where the external casing can be removed from all internal workings.

Neye ihtiyacın var

  1. Black and Decker WP900 Exterior Casing Replacement, Exterior Casing: adım 1, 1 resimden 1.

    • Using the plastic tool, detach the handle tab as shown.

    • Make sure the device is unplugged.

    Düzenle

  2. Black and Decker WP900 Exterior Casing Replacement: adım 2, 1 resimden 1.

    • Using the Phillips #1 screwdriver, unscrew all of the screws. There should be 8-30mm screws to remove.

    • Be sure to keep track of where each screw was placed in the device for later reassembly.

    Düzenle

  4. Black and Decker WP900 Exterior Casing Replacement: adım 3, 3 resimden 1. Black and Decker WP900 Exterior Casing Replacement: adım 3, 3 resimden 2. Black and Decker WP900 Exterior Casing Replacement: adım 3, 3 resimden 3.

    • Remove the back panel of the external casing, leaving all internal components resting in the front panel.

    • Remove the black handle from the main external casing.

    Düzenle

  5. Black and Decker WP900 Exterior Casing Replacement: adım 4, 1 resimden 1.

    • Using the Phillips #1 screwdriver, remove the two 22mm screws.

    • The metal bracket will detach with the two screws.

    • Using the Flathead 3/32" screwdriver, remove two 22mm screws.

    Düzenle

  6. Black and Decker WP900 Exterior Casing Replacement: adım 5, 2 resimden 1. Black and Decker WP900 Exterior Casing Replacement: adım 5, 2 resimden 2.

    • Gently pull the power cord out from the control module.

    • Remember, when reassembling the device, the black wire should be on the top.

    Düzenle

  7. Black and Decker WP900 Exterior Casing Replacement: adım 6, 1 resimden 1.

    • Firmly grasping the motor dislodge the internal components from the frontal external casing.

    • Once the motor has been removed, the external casing can now be replaced.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

David Hutchings

Üyelik tarihi: 03/28/16

101 İtibar

1 Kılavuz yazıldı

Rozetler: 2

Ekip

IUPUI, Team 8-8, Wilson Spring 2016 IUPUI, Team 8-8, Wilson Spring 2016 üyesi

IUPUI-WILSON-S16S8G8

4 Üyeler

4 adet Kılavuz yazıldı

1Rehber Yorum

Hello, this is Adam Kinnett from Group 7. You have done an excellent job on your photos as well as the descriptions and formatting.

**One of your Wiki pages on the search says "Back and Decker".

Adam Kinnett - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 7

Son 30 gün: 19

Her zaman: 995