Ana içeriğe geç

Black and Decker WP900 Motor Replacement

Neye ihtiyacın var

  1. Black and Decker WP900 Motor Replacement, Motor: adım 1, 1 resimden 1.
    • Using the plastic tool, detach the handle tab as shown.

    • Make sure the device is unplugged.

  2. Black and Decker WP900 Motor Replacement: adım 2, 1 resimden 1.
    • Using the Philips #1 screwdriver, unscrew all of the screws. There should be 8-30mm screws to remove.

    • Be sure to keep track of where each screw was placed in the device for later reassembly.

  3. Black and Decker WP900 Motor Replacement: adım 3, 3 resimden 1. Black and Decker WP900 Motor Replacement: adım 3, 3 resimden 2. Black and Decker WP900 Motor Replacement: adım 3, 3 resimden 3.
    • Remove the back panel of the external casing, leaving all internal components resting in the front panel.

    • Remove the black handle from the main external casing.

  4. Black and Decker WP900 Motor Replacement: adım 4, 1 resimden 1.
    • Loosen the power cord and control panel. Using the Phillips #1 screwdriver, remove two 22mm screws.

    • The metal bracket will detach with the two screws.

    • Using the Flathead 3/32" screwdriver, remove two 22mm screws.

  5. Black and Decker WP900 Motor Replacement: adım 5, 2 resimden 1. Black and Decker WP900 Motor Replacement: adım 5, 2 resimden 2.
    • Gently pull the power cord out from the control module.

    • Remember, when you're reassembling the device, the black wire should be on the top.

  6. Black and Decker WP900 Motor Replacement: adım 6, 1 resimden 1.
    • Firmly grasping the motor, dislodge the internal components from the frontal external casing.

    • Switch and control panel are attached to the motor.

  7. Black and Decker WP900 Motor Replacement: adım 7, 2 resimden 1. Black and Decker WP900 Motor Replacement: adım 7, 2 resimden 2.
    • Using a Phillips #1 screwdriver, remove the two 22mm screws securing the brush assembly to the motor.

  8. Black and Decker WP900 Motor Replacement: adım 8, 2 resimden 1. Black and Decker WP900 Motor Replacement: adım 8, 2 resimden 2.
    • To fully remove the brush assembly from the motor, push the brushes (enclosed in the gold ribbing) outward and pull up.

  9. Black and Decker WP900 Motor Replacement: adım 9, 1 resimden 1.
    • With a large amount of force, pull the motor up and off of the wire coil.

    The pad itself have fallen while im using it, can i still fix it?

    leworx_13 - Yanıt

    The backing plate has drop can i still fix it? Please help

    leworx_13 - Yanıt

    Do we know where we can order this motor part?

    Grant Gattuso - Yanıt

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Stefan Wolowec

Üyelik tarihi: 02/15/16

128 İtibar

1 Kılavuz yazıldı

Ekip

IUPUI, Team 8-8, Wilson Spring 2016 IUPUI, Team 8-8, Wilson Spring 2016 üyesi

IUPUI-WILSON-S16S8G8

4 Üyeler

4 adet Kılavuz yazıldı

Bir Yorum

Very straightforward tutotial. We are writing review of this product here https://www.helpful.reviews/en/product/4.... However we have not found many cases among owners of this product that they would need to repair motor by its replacement.

John Bazmek - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 15

Her zaman: 2,247