Eşyalarını Tamir Et Topluluk Mağaza

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Black and Decker WP900 Power Cord Replacement

Giriş

This page gives instructions for disassembling the Black and Decker WP900 6-Inch Orbital Waxer and Polisher to the point where the power cable can be fully removed and replaced.

Neye ihtiyacın var

  1. Black and Decker WP900 Power Cord Replacement, Power Cord: adım 1, 1 resimden 1.

    • Using the plastic tool, detach the handle tab as shown.

    • Make sure the device is unplugged.

    Düzenle

  2. Black and Decker WP900 Power Cord Replacement: adım 2, 1 resimden 1.

    • Using the Philips #1 screwdriver, unscrew all of the screws. There should be 8-30mm screws to remove.

    • Be sure to keep track of where each screw was placed in the device for later reassembly.

    Düzenle

  4. Black and Decker WP900 Power Cord Replacement: adım 3, 3 resimden 1. Black and Decker WP900 Power Cord Replacement: adım 3, 3 resimden 2. Black and Decker WP900 Power Cord Replacement: adım 3, 3 resimden 3.

    • Remove the back panel of the external casing, leaving all internal components resting in the front panel.

    • Remove the black handle from the main external casing.

    Düzenle

  5. Black and Decker WP900 Power Cord Replacement: adım 4, 1 resimden 1.

    • Loosen the power cord and control panel. Using the Phillips #1 screwdriver, remove two 22mm screws.

    • The metal bracket will detach with the two screws.

    • Using the Flathead 3/32" screwdriver, remove two 22mm screws.

    Düzenle

  6. Black and Decker WP900 Power Cord Replacement: adım 5, 2 resimden 1. Black and Decker WP900 Power Cord Replacement: adım 5, 2 resimden 2.

    • Gently pull the power cord out from the control module.

    • This is the part to be replaced. Remember to insert the black wire into the top port when installing the new cord.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Cameron

Üyelik tarihi: 02/15/16

231 İtibar

2 adet Kılavuz yazıldı

Rozetler: 12

+9 tane daha rozet

Ekip

IUPUI, Team 8-8, Wilson Spring 2016 IUPUI, Team 8-8, Wilson Spring 2016 üyesi

IUPUI-WILSON-S16S8G8

4 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 4

Her zaman: 271