Parçalar

Hiçbir parçaya gerek yok.

Remove the battery cover and battery before continuing.
  • Remove the battery cover and battery before continuing.

  • Remove the six T6 Torx screws on the back of the phone.

  • Make sure to keep the screws somewhere that they will not get lost.

Yorum Ekle

Using your finger nail or a spudger, carefully pry up the back cover.
  • Using your finger nail or a spudger, carefully pry up the back cover.

  • Begin in one spot and slowly circle around the device as you pry up all of the back cover.

Yorum Ekle

Lift off the back cover.
  • Lift off the back cover.

Yorum Ekle

Remove the two T6 screws.
  • Remove the two T6 screws.

Yorum Ekle

Remove the daughterboard. Remove the exposed vibration motor.
  • Remove the daughterboard.

  • Remove the exposed vibration motor.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Nick Alejandro

Üyelik tarihi: 24-01-2010

3 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 14-44, Regan Winter 2010 Cal Poly, Team 14-44, Regan Winter 2010 üyesi

CPSU-REGAN-W10S14G44

4 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 2,448