Ana içeriğe geç

Giriş

This will show you how to repair the vibrating motor in your blackberry.

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the battery cover and battery before continuing.
    • Remove the battery cover and battery before continuing.

    • Remove the six T6 Torx screws on the back of the phone.

    • Make sure to keep the screws somewhere that they will not get lost.

  2. Using your finger nail or a spudger, carefully pry up the back cover.
    • Using your finger nail or a spudger, carefully pry up the back cover.

    • Begin in one spot and slowly circle around the device as you pry up all of the back cover.

  3. iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now

    iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now
  4. Lift off the back cover.
    • Lift off the back cover.

  5. Remove the two T6 screws.
    • Remove the two T6 screws.

  6. Remove the daughterboard. Remove the exposed vibration motor.
    • Remove the daughterboard.

    • Remove the exposed vibration motor.

  7. Replace with new vibration motor.
    • Replace with new vibration motor.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Neil Johnson

Üyelik tarihi: 24-01-2010

12 İtibar

6 adet Kılavuz yazıldı

Takım

Cal Poly, Team 14-44, Regan Winter 2010 Cal Poly, Team 14-44, Regan Winter 2010 üyesi

CPSU-REGAN-W10S14G44

4 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 2

Her zaman: 4,413