Giriş

This Repair guide will walk you through the steps on how to replace a RIM Blackberry 8700c logic board.

Parçalar

Hiçbir parçaya gerek yok.

Remove the back cover by pushing down on the button and sliding the cover towards the bottom of the phone.
  • Remove the back cover by pushing down on the button and sliding the cover towards the bottom of the phone.

  • Set the cover aside. The battery will now be exposed.

Yorum Ekle

Remove the battery by pulling back on the notch on top edge of the battery.
  • Remove the battery by pulling back on the notch on top edge of the battery.

  • Set the battery aside.

Yorum Ekle

  • Unscrew and remove all four T6 Torx screws.

Yorum Ekle

  • Pull the back cover of the phone off and set it aside.

Yorum Ekle

  • Unscrew and remove all 4 T6 Torx screws.

Yorum Ekle

  • Lift and remove inner back cover and set aside.

    • A small side piece may fall away but is simple to reattach.

  • Remove logic board by gently lifting it off of the front cover of the phone.

    • New logic board can now simply be set in place.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

arlebrun

Üyelik tarihi: 02-12-2009

1 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 18-4, Maness Fall 2009 Cal Poly, Team 18-4, Maness Fall 2009 üyesi

CPSU-MANESS-F09S18G4

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 3,099