Press down on the battery release button and slide the back cover up with your thumb.
  • Press down on the battery release button and slide the back cover up with your thumb.

Yorum Ekle

Pry from the top of the battery to pull it out.
  • Pry from the top of the battery to pull it out.

Yorum Ekle

Slide the metal sim card cover to the unlock position.
  • Slide the metal sim card cover to the unlock position.

  • Remove the sim card.

  • The arrows on the sim card enclosure indicate the lock and unlock positions.

Yorum Ekle

Remove the two T5 Torx screws circled at the top of the phone.
  • Remove the two T5 Torx screws circled at the top of the phone.

  • The T5 Torx screws may be covered by a white sticker.

Yorum Ekle

Remove the red cover at the bottom of the phone.
  • Remove the red cover at the bottom of the phone.

  • You may have to work a spudger underneath to release the plastic clips.

Yorum Ekle

Be careful not to damage the front cover's plastic clips while trying to separate it from the phone. Use a spudger to pry the front cover away from the side panels. Work the spudger around the entire phone until the front cover is free.
  • Be careful not to damage the front cover's plastic clips while trying to separate it from the phone.

  • Use a spudger to pry the front cover away from the side panels.

  • Work the spudger around the entire phone until the front cover is free.

Yorum Ekle

Remove the keyboard.
  • Remove the keyboard.

Yorum Ekle

Remove the four T6 Torx screws located on the corners of the keyboard frame.
  • Remove the four T6 Torx screws located on the corners of the keyboard frame.

Yorum Ekle

Now remove the left and right side panels. Now remove the left and right side panels.
  • Now remove the left and right side panels.

Yorum Ekle

Remove the keyboard frame. Be sure to unhook the screen housing from the motherboard before continuing.  Refer to the square indicated in the second picture. Now remove the screen housing.
  • Remove the keyboard frame.

  • Be sure to unhook the screen housing from the motherboard before continuing. Refer to the square indicated in the second picture.

  • Now remove the screen housing.

Yorum Ekle

Unplug the ribbon cable from the board.
  • Unplug the ribbon cable from the board.

  • The ribbon cable is located at the top left of the phone above the screen.

Yorum Ekle

Insert tool between LCD screen and board.
  • Insert tool between LCD screen and board.

  • Pry LCD screen from board.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

4 başka kişi bu kılavuzu tamamladı.

Mandy Chan

Üyelik tarihi: 20-01-2012

88 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 10-32, Amido Winter 2012 Cal Poly, Team 10-32, Amido Winter 2012 üyesi

CPSU-AMIDO-W12S10G32

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 1

Her zaman: 1,607