Giriş

Work area should be lint free, clean and well lit.

Parçalar

Hiçbir parçaya gerek yok.

Open the rear panel to expose the chassis assembly.
  • Open the rear panel to expose the chassis assembly.

  • Remove the battery.

Yorum Ekle

Use a small non-marring plastic opening tool to remove the lower rear cover.
  • Use a small non-marring plastic opening tool to remove the lower rear cover.

Yorum Ekle

  • Use a T6 Torq screw to loosen and remove the six screws from the chassis as shown.

Yorum Ekle

  • Remove the midframe from the phone.

Yorum Ekle

  • Remove the remaining core assembly from the case, by carefully prying the side release tabs.

Yorum Ekle

  • Gently pry the side release tabs to lift the flexing keypad from the frame.

  • The navigation ball may come loose at this point. Set it aside with the keypad for reassembly.

Yorum Ekle

  • Gently lift the motherboard.

  • Locate the screen's ribbon cable underneath the motherboard, and detach it from the phone.

Yorum Ekle

  • Carefully pry at the sides of the screen until the display assembly is free. Remove the display from the motherboard unit.

  • Insert the replacement display assembly and reverse the directions to re-assemble.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

4 başka kişi bu kılavuzu tamamladı.

Renae Bishop

Üyelik tarihi: 07-09-2011

66 İtibar

4 adet Kılavuz yazıldı

Takım

Cuesta, Team 1-3, Zipperian Fall 2011 Cuesta, Team 1-3, Zipperian Fall 2011 üyesi

CUESTA-ZIPPERIAN-F11S1G3

3 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 4

Her zaman: 3,996