Neye ihtiyacın var
-
-
Turn phone over to the backside.
-
Press down on the lower portion of the back cover.
-
Slide the lower portion down to remove the cover and reveal the battery.
FixBot'a Sor
-
-
-
Once the battery is removed, remove the four 9.2 mm screws with the T4 Torx Screwdriver.
-
-
-
-
Remove side panels with the Plastic Opening Tool by sliding it along the edge of the panel until you can pry it off with the tool.
-
-
-
Locate the two 9.2mm screws on the upper inside casing
-
Remove them using the T4 Torx Screwdriver
-
Slide off the front casing once the screws are removed.
-
To reassemble your device, follow these instructions in reverse order.
Ekip
Cal Poly, Team 17-27, Amido Spring 2012 Cal Poly, Team 17-27, Amido Spring 2012 üyesi
CPSU-AMIDO-S12S17G27
4 Üyeler
16 adet Kılavuz yazıldı
