Giriş

This guide outlines how to do initial disassembly for the device and doubles as prerequisites for other guides.

Parçalar

Hiçbir parçaya gerek yok.

  1. With the back of the device facing you, press down on the button while sliding the battery casing away from the speaker to remove it.
    • With the back of the device facing you, press down on the button while sliding the battery casing away from the speaker to remove it.

    Yorum Ekle

  2. Use a plastic opening tool or fingernails to unclip the two hinges of the speaker covering and remove it.
    • Use a plastic opening tool or fingernails to unclip the two hinges of the speaker covering and remove it.

    Yorum Ekle

    • Remove the battery by pushing against it from the right and then pulling towards you.

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the four screws indicated in the picture with a #T6 Torx Bit screwdriver and set them aside.

    Yorum Ekle

    • Use a plastic opening tool or your fingernails to remove the plastic backing.

    • Start with the seam indicated in the picture and slide the plastic opening tool until the case is seperated.

    Yorum Ekle

    • Unscrew the four screws indicated in the picture with #T6 Torx Bit screwdriver.

    • Place the four screws released from the phone in a plastic bag.

    Yorum Ekle

    • The black battery casing and logic board can now be separated for the following steps.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

kelogan

Üyelik tarihi: 04-11-2009

1 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 9-17, Regan Fall 2009 Cal Poly, Team 9-17, Regan Fall 2009 üyesi

CPSU-REGAN-F09S9G17

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 2,062