Giriş

Disassembling the logic board in the rear of the Blackberry allows you to get to the LCD screen and keypad.

Parçalar

Hiçbir parçaya gerek yok.

Turn the phone upside down. Push down on the black button on the back of the phone to slide the rear panel off.
  • Turn the phone upside down.

  • Push down on the black button on the back of the phone to slide the rear panel off.

  • The battery should be visible now.

Yorum Ekle

Hold the BlackBerry in one hand face-up with the screen facing towards you. Gently smack the phone against your hand to dislodge the battery. Gently smack the phone against your hand to dislodge the battery.
  • Hold the BlackBerry in one hand face-up with the screen facing towards you.

  • Gently smack the phone against your hand to dislodge the battery.

Yorum Ekle

Use a T6 Torx screwdriver to remove the 6 screws holding the rear of the phone. Use a T6 Torx screwdriver to remove the 6 screws holding the rear of the phone.
  • Use a T6 Torx screwdriver to remove the 6 screws holding the rear of the phone.

Yorum Ekle

Use a pick or small tool to push the clips holding the rear away from you. Applying too much pressure could break the plastic clips and permanently damage your Blackberry.
  • Use a pick or small tool to push the clips holding the rear away from you.

  • Applying too much pressure could break the plastic clips and permanently damage your Blackberry.

Yorum Ekle

Mac RAM Kitleri
Mac'inizi hızlandırın. Hafızasını en yükseğe çıkar.
Mac RAM Kitleri
Mac'inize daha fazla bellek alın.
Repeat the process of unlatching the clips for the top section of the Blackberry.
  • Repeat the process of unlatching the clips for the top section of the Blackberry.

Yorum Ekle

Slide the rear panel forward to reveal the logic board. Slide the rear panel forward to reveal the logic board.
  • Slide the rear panel forward to reveal the logic board.

Yorum Ekle

Remove the indicated screws using a T6 Torx screwdriver. Remove the indicated screws using a T6 Torx screwdriver.
  • Remove the indicated screws using a T6 Torx screwdriver.

Yorum Ekle

Remove the logic board. Remove the indicated screw using the T6 Torx screwdriver.
  • Remove the logic board.

  • Remove the indicated screw using the T6 Torx screwdriver.

Yorum Ekle

Pull the metal plate away from the front panel of the cell phone. Pull the metal plate away from the front panel of the cell phone.
  • Pull the metal plate away from the front panel of the cell phone.

Yorum Ekle

Place the faceplate face-down and the interior of the phone face-up, as shown.
  • Place the faceplate face-down and the interior of the phone face-up, as shown.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Nathan

Üyelik tarihi: 18-01-2010

31 İtibar

7 adet Kılavuz yazıldı

Takım

Cal Poly, Team 5-7, Forte Winter 2010 Cal Poly, Team 5-7, Forte Winter 2010 üyesi

CPSU-FORTE-W10S5G7

5 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 3,348