Eşyalarını Tamir Et Topluluk Mağaza

Blade Removal Technique

Giriş

This guide will show you several blade removing techniques for when the blades are stuck somewhere on the motor of your Ninja Master Prep QB900B.

Be sure to have a tough cloth or a cut resistant glove on hand for the repair. In addition, make sure to turn off the device and unplug from the power outlet before beginning this repair.

Neye ihtiyacın var

  1. Blade Removal Technique, Blade Removal Technique: adım 1, 1 resimden 1.

    • To remove the blades from each other, twist both blades in opposite directions and pull.

    • Be cautious, the blades are sharp.

    Düzenle

  3. Blade Removal Technique: adım 2, 1 resimden 1.

    • To remove the blades from the cup. Firmly grasp the bottom of the cup.

    • Be careful when you are doing this next step.

    • Pull upward as shown on the top of the blades.

    Düzenle

  4. Blade Removal Technique: adım 3, 1 resimden 1.

    • To remove the blades from the motor, firmly grasp the motor top.

    • Next. Take a cloth or cut-resistant glove and grasp the blades.

    • Be careful during this next step.

    • Now twist both ends in opposite directions to separate.

    Düzenle
Bitiş Çizgisi

Yazar

6 tane daha katılımcı ile

Kamal Taha

Üyelik tarihi: 08/27/15

679 İtibar

5 adet Kılavuz yazıldı

Rozetler: 16

+13 tane daha rozet

Ekip

USF Tampa, Team 1-3, Sullivan Fall 2015 USF Tampa, Team 1-3, Sullivan Fall 2015 üyesi

USFT-SULLIVAN-F15S1G3

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 3

Her zaman: 954