Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

This guide will help you replace the IR receiver in your Bose speaker.

Parçalar

Hiçbir parça belirtilmedi.

  1. Gently pry the front mesh cover off of the sound dock using a metal spudger. The mesh is held on by small velcro strips so if you hear a tearing sound it is just the velcro coming apart. The mesh is held on by small velcro strips so if you hear a tearing sound it is just the velcro coming apart.
    • Gently pry the front mesh cover off of the sound dock using a metal spudger.

    • The mesh is held on by small velcro strips so if you hear a tearing sound it is just the velcro coming apart.

  2. Nintendo Switch Setleri

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Setleri

    A quick fix to get back in the game

    Shop Switch Kits
  3. Using a T15 torx screwdriver, remove the 8mm screw holding the IR sensor to the speaker system.
    • Using a T15 torx screwdriver, remove the 8mm screw holding the IR sensor to the speaker system.

  4. Using tweezers or your fingers, gently remove the ribbon cable connecting the IR sensor to the system.
    • Using tweezers or your fingers, gently remove the ribbon cable connecting the IR sensor to the system.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Evan Low

Üyelik tarihi: 14-04-2015

476 İtibar

4 adet Kılavuz yazıldı

Takım

Cal Poly, Team 4-1, Maness Spring 2015 Cal Poly, Team 4-1, Maness Spring 2015 üyesi

CPSU-MANESS-S15S4G1

4 Üyeler

5 adet Kılavuz yazıldı

Bir Yorum

Hi my sounddock blocked suddenly and the green led always on. Do you now something about please... :(

jose - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 22

Son 30 gün: 69

Her zaman: 4,428