Ana içeriğe geç

Giriş

In this guide, details about disassembling the BOSE SOUNDLINK Revolve speaker are included for individuals who need instructions on how to troubleshoot and fix the speaker.

The Bose SOUNDLINK Revolve is a compact Bluetooth speaker that provides premium quality sound while still light and easy enough to carry. This specific example is not functioning as the speaker can’t be turned on. Thus, our team performed an educational disassemble of the device in order to troubleshoot the problem.

  1. Use a plastic opening tool or metal spudger to remove the rubber mount from the bottom of the speaker.
    • Use a plastic opening tool or metal spudger to remove the rubber mount from the bottom of the speaker.

  2. Use a T10 screwdriver to remove the three 10 mm screws from the bottom of the speaker.
    • Use a T10 screwdriver to remove the three 10 mm screws from the bottom of the speaker.

  3. Unhook the ribbon conector that connects the bottom cover to the body, then remove the bottom part of the speaker.
    • Unhook the ribbon conector that connects the bottom cover to the body, then remove the bottom part of the speaker.

  4. Use a TR9 screwdriver to remove the screws from the top of the speaker, and then remove the top part of the speaker along with the motherboard.
    • Use a TR9 screwdriver to remove the screws from the top of the speaker, and then remove the top part of the speaker along with the motherboard.

  5. Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın

    Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın
  6. Slide the body of the speaker from the metal cover.
    • Slide the body of the speaker from the metal cover.

  7. Use a T10 screwdriver to remove the four 6 mm screws around the 2 speakers, and remove the speaker units from the body.
    • Use a T10 screwdriver to remove the four 6 mm screws around the 2 speakers, and remove the speaker units from the body.

  8. Pull off the metal case from the speaker body.
    • Pull off the metal case from the speaker body.

  9. Remove the three 25.3mm screws from the bottom part of the speaker body with a T10 Torx screwdriver.
    • Remove the three 25.3mm screws from the bottom part of the speaker body with a T10 Torx screwdriver.

  10. Use a spudger to pry apart the glued section between the speaker panel and the device.
    • Use a spudger to pry apart the glued section between the speaker panel and the device.

  11. Open the speaker panel, then unwind the three wires from the speaker
    • Open the speaker panel, then unwind the three wires from the speaker

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Ruoyu Han

Üyelik tarihi: 14-01-2019

28 İtibar

1 Kılavuz yazıldı

Takım

IUPUI, Team S1-G1, Wilson Spring 2019 IUPUI, Team S1-G1, Wilson Spring 2019 üyesi

IUPUI-WILSON-S19S1G1

3 Üyeler

2 adet Kılavuz yazıldı

Bir Yorum

Is it possible to buy a replacement subwoofer? Mine has been dropped and it's only the bass elements that sound distorted, thank you

weedon2759 - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 Gün: 95

Son 30 Gün: 461

Her zaman: 1,871