Ana içeriğe geç

Bowers and Wilkins P5 Headphones Audio Cable Replacement

  1. Bowers and Wilkins P5 Headphones Audio Cable Replacement, Earpads: adım 1, 1 resimden 1.
    • To start, make sure that the headphones are disconnected from any audio source.

  2. Bowers and Wilkins P5 Headphones Audio Cable Replacement: adım 2, 1 resimden 1.
    • Fold the earpads flat.

  3. Bowers and Wilkins P5 Headphones Audio Cable Replacement: adım 3, 2 resimden 1. Bowers and Wilkins P5 Headphones Audio Cable Replacement: adım 3, 2 resimden 2.
    • Pull off the earpad.

    • When putting the earpads back on, make sure that the groove in the earpad is facing towards the top of the headphones.

  4. Bowers and Wilkins P5 Headphones Audio Cable Replacement, Audio Cable: adım 4, 1 resimden 1.
    • Take the audio cable out of the clip.

  5. Bowers and Wilkins P5 Headphones Audio Cable Replacement: adım 5, 1 resimden 1.
    • Pull out the audio cable.

  6. Bowers and Wilkins P5 Headphones Audio Cable Replacement: adım 6, 1 resimden 1.
    • Headphones remain.

Sonuç

To reassemble your device, follow these instructions in reverse order.

4 farklı kişi bu kılavuzu tamamladı.

Ashley Ryan

Üyelik tarihi: 03/25/12

5.579 İtibar

3 adet Kılavuz yazıldı

Ekip

Master Techs Master Techs üyesi

Community

322 Üyeler

2.506 adet Kılavuz yazıldı

Bir Yorum

I replaced cable once and all was fine. Now left side only not working. Could it be something else or just time for a new cable?

Jayrosen - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 10

Son 30 gün: 34

Her zaman: 9,543