Giriş

Removing the internal one-way valve may become necessary if it becomes clogged and water is not flowing properly through the coffee maker.

Remove the carafe (coffee pot) from the coffee maker.
  • Remove the carafe (coffee pot) from the coffee maker.

  • Turn the Braun Aromaster KF 440 upside down so the base is exposed.

Yorum Ekle

Locate the nut at the center of the base and unscrew it with a pair of basic pliers.
  • Locate the nut at the center of the base and unscrew it with a pair of basic pliers.

Yorum Ekle

  • Gently lift the cover away from the bottom of the coffee maker and remove it.

Yorum Ekle

  • Locate the one-way valve.

Yorum Ekle

  • Lift up on the one way valve to snap it out of place. (This shouldn't require much force).

Yorum Ekle

  • Using the larger plastic opening tool, gently push the tubing off of the one-way valve. (If the tubing is being stubborn and won't come off, run the metal spudger around the inside of tubing to free it up.)

Yorum Ekle

  • Completely remove one-way valve from the inside of the coffee maker.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 başka kişi bu kılavuzu tamamladı.

Dennis

Üyelik tarihi: 20-10-2014

255 İtibar

2 adet Kılavuz yazıldı

Takım

Baylor, Team 8-12, Williams Fall 2014 Baylor, Team 8-12, Williams Fall 2014 üyesi

BU-WILLIAMS-F14S8G12

3 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 6

Son 30 Gün: 33

Her zaman: 1,132