Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

This guide will show you how to replace the food pusher that is responsible for pushing the ingredients into the blades of the juicer. Always remember to unplug the juicer before disassembling.

  1. Place the juicer on a flat surface. Make sure the juicer is unplugged and in the "off" position. For the following steps, the pulp basket is on the left.
    • Place the juicer on a flat surface. Make sure the juicer is unplugged and in the "off" position. For the following steps, the pulp basket is on the left.

  2. Tilt the juicer slightly to the right so the pulp basket is off of your surface.
    • Tilt the juicer slightly to the right so the pulp basket is off of your surface.

  3. Pull the pulp basket down and out from under the juicer cover.
    • Pull the pulp basket down and out from under the juicer cover.

  4. Place one hand on either side of the safety locking arm. Disengage the locking mechanism by pulling down on the lever with even pressure. The lever should be free to move up or down once it has been properly disengaged.
    • Place one hand on either side of the safety locking arm.

    • Disengage the locking mechanism by pulling down on the lever with even pressure. The lever should be free to move up or down once it has been properly disengaged.

  5. Firmly grip both sides of the juicer. Twist clock-wise and lift to remove the lid. Firmly grip both sides of the juicer. Twist clock-wise and lift to remove the lid.
    • Firmly grip both sides of the juicer. Twist clock-wise and lift to remove the lid.

  6. Place one hand on the food pusher grip, and pull upward. Continue to slide the food pusher until it has fully cleared the food chute. Place one hand on the food pusher grip, and pull upward. Continue to slide the food pusher until it has fully cleared the food chute.
    • Place one hand on the food pusher grip, and pull upward. Continue to slide the food pusher until it has fully cleared the food chute.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Madison Burgess

Üyelik tarihi: 06-10-2016

499 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 15-1, Livingston Fall 2016 Cal Poly, Team 15-1, Livingston Fall 2016 üyesi

CPSU-LIVINGSTON-F16S15G1

3 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 324