Remove the back cover of the device by simultaneously pressing down on the indication arrows on the top center, then pulling toward you.
  • Remove the back cover of the device by simultaneously pressing down on the indication arrows on the top center, then pulling toward you.

Yorum Ekle

Brother TZ tape is required for this replacement process. We don't have the tape cassette but you should be able to insert tape cassette into the red marked area as shown in the picture.
  • Brother TZ tape is required for this replacement process. We don't have the tape cassette but you should be able to insert tape cassette into the red marked area as shown in the picture.

  • Insert tape cassette into the red marked area as shown in the picture.

  • Make sure the cassette snaps into place by applying a small amount of pressure.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Haley Sweet

Üyelik tarihi: 30-10-2014

425 İtibar

4 adet Kılavuz yazıldı

Takım

Baylor, Team 4-4, Williams Fall 2014 Baylor, Team 4-4, Williams Fall 2014 üyesi

BU-WILLIAMS-F14S4G4

4 Üyeler

4 adet Kılavuz yazıldı

2 Yorum

So if you've replaced the cassette and it still won't print now what??

Sara Mullaney - Yanıt

This was supposed to help with model PT-450D which looks nothing like this. Please help. I can’t REMOVE / replace the cassette !!! It is STUCK inside the label printer!

af4k - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 5

Son 30 Gün: 40

Her zaman: 1,663