Ana içeriğe geç

Brother PT-110 Printer Motor Replacement

Neye ihtiyacın var

  1. Brother PT-110 Printer Motor Replacement, Batteries: adım 1, 2 resimden 1. Brother PT-110 Printer Motor Replacement, Batteries: adım 1, 2 resimden 2.
    • Push on the side of the cover, and remove it.

  2. Brother PT-110 Printer Motor Replacement: adım 2, 1 resimden 1.
    • Remove the batteries.

  3. Brother PT-110 Printer Motor Replacement, Back Plate: adım 3, 2 resimden 1. Brother PT-110 Printer Motor Replacement, Back Plate: adım 3, 2 resimden 2.
    • Unscrew the two 9 mm Phillips #1 screws from the top and bottom.

    • Total: 2 x Screws

  4. Brother PT-110 Printer Motor Replacement: adım 4, 1 resimden 1.
    • First: To separate the top cover from the body, insert a spudger between the two halves.

    • Gently twist the spudger until the two halves separate. Do this in multiple spots around the perimeter of the cover to distribute the pressure.

    • DO NOT PULL HALVES APART. There are wired connections inside that must be disconnected before halves can be fully separated.

  5. Brother PT-110 Printer Motor Replacement: adım 5, 1 resimden 1.
    • Gently separate the two covers, ensuring wires are not taut.

  6. Brother PT-110 Printer Motor Replacement: adım 6, 1 resimden 1.
    • Gently grasp the ribbon wire and top cover, then gently pull the ribbon wire out of its connection.

  7. Brother PT-110 Printer Motor Replacement: adım 7, 2 resimden 1. Brother PT-110 Printer Motor Replacement: adım 7, 2 resimden 2.
    • Carefully pinch the top of the connector.

    • Pull perpendicular to the device until the wire is disconnected.

    • It may require more force than expected to disconnect the wires.

  8. Brother PT-110 Printer Motor Replacement: adım 8, 3 resimden 1. Brother PT-110 Printer Motor Replacement: adım 8, 3 resimden 2. Brother PT-110 Printer Motor Replacement: adım 8, 3 resimden 3.
    • Unscrew the three 9 mm Phillips #1 screws shown.

    • Total: 3 x Screws

  9. Brother PT-110 Printer Motor Replacement, Printer Motor: adım 9, 1 resimden 1.
    • Remove the motor housing.

  10. Brother PT-110 Printer Motor Replacement: adım 10, 2 resimden 1. Brother PT-110 Printer Motor Replacement: adım 10, 2 resimden 2.
    • Unscrew the two 3 mm Phillips #1 screws from the motor housing.

    • Total: 2 x Screws

  11. Brother PT-110 Printer Motor Replacement: adım 11, 1 resimden 1.
    • Remove the motor.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Kimberly Larsen

Üyelik tarihi: 09/28/16

216 İtibar

5 adet Kılavuz yazıldı

Ekip

IUPUI, Team 1-1, Harley Fall 2016 IUPUI, Team 1-1, Harley Fall 2016 üyesi

IUPUI-HARLEY-F16S1G1

3 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 11

Her zaman: 771