Ana içeriğe geç

Bush Pump Head and Handle Replacement

  1. Bush Pump Head and Handle Replacement, Head and Handle: adım 1, 2 resimden 1. Bush Pump Head and Handle Replacement, Head and Handle: adım 1, 2 resimden 2.
    • Test pump performance by pumping 40 strokes.

    • An effective pump should return at least 10 liters.

  2. Bush Pump Head and Handle Replacement: adım 2, 2 resimden 1. Bush Pump Head and Handle Replacement: adım 2, 2 resimden 2.
    • Remove the two pins connecting the handle to the slider.

  3. Bush Pump Head and Handle Replacement: adım 3, 2 resimden 1. Bush Pump Head and Handle Replacement: adım 3, 2 resimden 2.
    • Pull the two lever arms away from the slider.

  4. Bush Pump Head and Handle Replacement: adım 4, 2 resimden 1. Bush Pump Head and Handle Replacement: adım 4, 2 resimden 2.
    • Lift the two pins attaching the pump frame to the head and handle up, off of the pump frame.

  5. Bush Pump Head and Handle Replacement: adım 5, 3 resimden 1. Bush Pump Head and Handle Replacement: adım 5, 3 resimden 2. Bush Pump Head and Handle Replacement: adım 5, 3 resimden 3.
    • Throughout this step, make sure you support the handle and head with at least three hands.

    • Slide the bearing rod out of the head.

    • Inspect the bearing rod and head for any wear or tear.

  6. Bush Pump Head and Handle Replacement: adım 6, 1 resimden 1.
    • Remove the head and handle, and place them on a clean surface to prevent contamination.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Jake Devincenzi

Üyelik tarihi: 04/18/11

117.225 İtibar

57 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 163