Giriş

This guide will show you how to access, remove, and replace the LCD screen. The process is safe and uncomplicated.

Remove the two 4.8 mm black screws above the lens on the front of the camera.
  • Remove the two 4.8 mm black screws above the lens on the front of the camera.

Yorum Ekle

Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.
  • Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

Yorum Ekle

Remove the 4.8 mm black screw on the left side of the camera.
  • Remove the 4.8 mm black screw on the left side of the camera.

Yorum Ekle

Remove the front panel by lifting it away from the camera's body.
  • Remove the front panel by lifting it away from the camera's body.

Yorum Ekle

Slide the outer eyepiece upward to remove it.
  • Slide the outer eyepiece upward to remove it.

Yorum Ekle

Remove the two 4.75 mm black screws located  on the top of the camera.
  • Remove the two 4.75 mm black screws located on the top of the camera.

Yorum Ekle

Remove the four 4.3 mm  black screws near the bottom corners of the eyepiece at the back of the camera.
  • Remove the four 4.3 mm black screws near the bottom corners of the eyepiece at the back of the camera.

Yorum Ekle

Slowly separate the top panel from the camera by pushing it upward. Separating the top panel too far or quickly can damage the ribbon cable and connecting wires that are still attached to the top panel of the camera.
  • Slowly separate the top panel from the camera by pushing it upward.

  • Separating the top panel too far or quickly can damage the ribbon cable and connecting wires that are still attached to the top panel of the camera.

Yorum Ekle

To unclip gold connector push the edge up and away from the lcd screen. A plastic opening tool is recommended.
  • To unclip gold connector push the edge up and away from the lcd screen. A plastic opening tool is recommended.

  • The gold connector can fall into the camera, but it will remain attached and can be pulled back up.

Yorum Ekle

Lift LCD screen out of mount.
  • Lift LCD screen out of mount.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Sterling Vinson

Üyelik tarihi: 17-04-2011

216 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 8-8, Regan Spring 2011 Cal Poly, Team 8-8, Regan Spring 2011 üyesi

CPSU-REGAN-S11S8G8

5 Üyeler

11 adet Kılavuz yazıldı

2 Yorum

Thank's , your tutorial nice ... gracias

fajar - Yanıt

Where do you find replacement lcd screen if the one on the camera is cracked?

Jasmine - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 4

Son 30 Gün: 9

Her zaman: 4,508