Giriş

This guide will help you step by step to reach and replace the inner eyepiece of canon EOS 30.

Parçalar

Hiçbir parçaya gerek yok.

Remove the two 4.8 mm black screws above the lens on the front of the camera.
  • Remove the two 4.8 mm black screws above the lens on the front of the camera.

Yorum Ekle

Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.
  • Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

Yorum Ekle

Remove the 4.8 mm black screw on the left side of the camera.
  • Remove the 4.8 mm black screw on the left side of the camera.

Yorum Ekle

Remove the front panel by lifting it away from the camera's body.
  • Remove the front panel by lifting it away from the camera's body.

Yorum Ekle

Slide the outer eyepiece upward to remove it.
  • Slide the outer eyepiece upward to remove it.

Yorum Ekle

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove the two 4.75 mm black screws located  on the top of the camera.
  • Remove the two 4.75 mm black screws located on the top of the camera.

Yorum Ekle

Remove the four 4.3 mm  black screws near the bottom corners of the eyepiece at the back of the camera.
  • Remove the four 4.3 mm black screws near the bottom corners of the eyepiece at the back of the camera.

Yorum Ekle

Slowly separate the top panel from the camera by pushing it upward. Separating the top panel too far or quickly can damage the ribbon cable and connecting wires that are still attached to the top panel of the camera.
  • Slowly separate the top panel from the camera by pushing it upward.

  • Separating the top panel too far or quickly can damage the ribbon cable and connecting wires that are still attached to the top panel of the camera.

Yorum Ekle

Remove the two 9.5 mm black screws that attach the inner eyepiece to the camera's body and remove the eyepiece.
  • Remove the two 9.5 mm black screws that attach the inner eyepiece to the camera's body and remove the eyepiece.

Yorum Ekle

Remove the two 4.3 mm silver screws on each side of the inner eyepiece.
  • Remove the two 4.3 mm silver screws on each side of the inner eyepiece.

Yorum Ekle

Separate the inner eyepiece into three parts.
  • Separate the inner eyepiece into three parts.

  • The outer piece (left) has a small gear, which can easily fall off and get lost.

Yorum Ekle

Remove the two 3.6 mm black screws from the outer piece.
  • Remove the two 3.6 mm black screws from the outer piece.

Yorum Ekle

Remove the glass panel and replace it.
  • Remove the glass panel and replace it.

  • When removing the glass panel make sure not to separate the small rubber piece attached around the frame.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 başka kişi bu kılavuzu tamamladı.

Jackie

Üyelik tarihi: 17-04-2011

218 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 8-8, Regan Spring 2011 Cal Poly, Team 8-8, Regan Spring 2011 üyesi

CPSU-REGAN-S11S8G8

5 Üyeler

11 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 7

Her zaman: 2,317