Eşyalarını Tamir Et Topluluk Mağaza

Canon EOS 300 Battery Door Replacement

Giriş

If the camera is not turning on, the batteries may need to be replaced.

Neye ihtiyacın var

  1. Canon EOS 300 Battery Door Replacement, Batteries: adım 1, 3 resimden 1. Canon EOS 300 Battery Door Replacement, Batteries: adım 1, 3 resimden 2. Canon EOS 300 Battery Door Replacement, Batteries: adım 1, 3 resimden 3.

    • Open up the battery door.

    Düzenle

  2. Canon EOS 300 Battery Door Replacement: adım 2, 2 resimden 1. Canon EOS 300 Battery Door Replacement: adım 2, 2 resimden 2.

    • Remove the batteries from the camera by sliding them out into your palm.

    Düzenle

  3. Canon EOS 300 Battery Door Replacement, Side Panel with Lever: adım 3, 2 resimden 1. Canon EOS 300 Battery Door Replacement, Side Panel with Lever: adım 3, 2 resimden 2.

    • Release the side latch to open the back panel.

    Düzenle

  4. Canon EOS 300 Battery Door Replacement: adım 4, 2 resimden 1. Canon EOS 300 Battery Door Replacement: adım 4, 2 resimden 2.

    • Remove the two black 4.5mm screws above and below the latch.

    Düzenle

  5. Canon EOS 300 Battery Door Replacement: adım 5, 2 resimden 1. Canon EOS 300 Battery Door Replacement: adım 5, 2 resimden 2.

    • Using your finger, carefully pry open the side panel from the top of camera.

    • Pull panel downwards to remove.

    • Make sure to keep track of the small black piece of rubber under the latch.

    Düzenle

  7. Canon EOS 300 Battery Door Replacement, Front Panel: adım 6, 2 resimden 1. Canon EOS 300 Battery Door Replacement, Front Panel: adım 6, 2 resimden 2.

    • Remove the two silver 6mm Phillips #1 screws.

    Düzenle

  8. Canon EOS 300 Battery Door Replacement: adım 7, 2 resimden 1. Canon EOS 300 Battery Door Replacement: adım 7, 2 resimden 2.

    • Flip camera over to the bottom.

    • Remove the one 5mm Phillips #1 silver screw.

    Düzenle

  9. Canon EOS 300 Battery Door Replacement: adım 8, 2 resimden 1. Canon EOS 300 Battery Door Replacement: adım 8, 2 resimden 2.

    • Remove the front panel by pulling away from the side with the lever.

    Düzenle

  10. Canon EOS 300 Battery Door Replacement, Bottom Panel: adım 9, 2 resimden 1. Canon EOS 300 Battery Door Replacement, Bottom Panel: adım 9, 2 resimden 2.

    • Remove three black 7.3mm Phillips #1 screws located on the corners of the camera.

    • Remove five black 4.8mm Phillips #1 screws.

    Düzenle

  11. Canon EOS 300 Battery Door Replacement: adım 10, 3 resimden 1. Canon EOS 300 Battery Door Replacement: adım 10, 3 resimden 2. Canon EOS 300 Battery Door Replacement: adım 10, 3 resimden 3.

    • Simply remove the bottom panel by prying it off with your finger.

    • When removing the panel, be sure the bottom of the camera is facing upright. There are loose gears that may fall out.

    • Be wary of a loose piece of foam attached to the bottom panel.

    Düzenle

  12. Canon EOS 300 Battery Door Replacement, Side Panel with Grip: adım 11, 3 resimden 1. Canon EOS 300 Battery Door Replacement, Side Panel with Grip: adım 11, 3 resimden 2. Canon EOS 300 Battery Door Replacement, Side Panel with Grip: adım 11, 3 resimden 3.

    • Remove the remote control socket cover.

    Düzenle

  13. Canon EOS 300 Battery Door Replacement: adım 12, 2 resimden 1. Canon EOS 300 Battery Door Replacement: adım 12, 2 resimden 2.

    • Remove two black 4.5mm Phillips #1 screws.

    Düzenle

  14. Canon EOS 300 Battery Door Replacement: adım 13, 2 resimden 1. Canon EOS 300 Battery Door Replacement: adım 13, 2 resimden 2.

    • Remove two black 4.8mm Phillips #1 screws on the front of the camera.

    Düzenle

  15. Canon EOS 300 Battery Door Replacement: adım 14, 2 resimden 1. Canon EOS 300 Battery Door Replacement: adım 14, 2 resimden 2.

    • Pry open the side grip using a spudger.

    Düzenle

  16. Canon EOS 300 Battery Door Replacement, Battery Door: adım 15, 3 resimden 1. Canon EOS 300 Battery Door Replacement, Battery Door: adım 15, 3 resimden 2. Canon EOS 300 Battery Door Replacement, Battery Door: adım 15, 3 resimden 3.

    • Remove one black 5mm Phillips #1 screw.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

4 farklı kişi bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Jordan Tang

Üyelik tarihi: 01/24/14

605 İtibar

5 adet Kılavuz yazıldı

Rozetler: 12

+9 tane daha rozet

Ekip

Cal Poly, Team 6-20, Maness Winter 2014 Cal Poly, Team 6-20, Maness Winter 2014 üyesi

CPSU-MANESS-W14S6G20

4 Üyeler

32 adet Kılavuz yazıldı

3Kılavuz Yorumları

When reassembling, make sure to attach the spring shown in step 8 to the film back release mechanism. I missed this the first time I reassembled the camera and the release/close slide would not automatically close like it did before. I found keeping a finger over the bottom post and using the SIM removal bit to stretch the spring to the top of the slide was very useful. Overall great guide! Thanks for posting!

Cody Mull - Yanıt

would there be a way to do it faster? i just need to attach a battery grip and am not comfortable with taking the whole camera apart just to unscrew 1 screw

sillyfy cz -

Thank you for this support.

Where can I find a new battery cover for the Canon EOS 300?

Mine is broken;

Do you have a website, please?

Best regards

Pierre-Yves Estors - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 9

Son 30 gün: 29

Her zaman: 2,680