Ana içeriğe geç

Giriş

If your date and time battery needs to be replaced, follow this guide to replace it. The required date and time battery is a CR2016 lithium.

Aletler

Hiçbir alet belirtilmedi.

Parçalar

  1. Locate the battery compartment cover on the bottom of the camera below the shutter button.
    • Locate the battery compartment cover on the bottom of the camera below the shutter button.

  2. Find the marked arrow on the battery compartment cover labeled "BATT. OPEN". Slide the lever following the arrow's direction and lift at the same time to release the latch.
    • Find the marked arrow on the battery compartment cover labeled "BATT. OPEN". Slide the lever following the arrow's direction and lift at the same time to release the latch.

  3. Release the lever and allow the battery compartment cover to completely open.
    • Release the lever and allow the battery compartment cover to completely open.

    • Remove the battery.

  4. Remove the date and time battery holder by sliding it out of the slot. Remove the date and time battery holder by sliding it out of the slot. Remove the date and time battery holder by sliding it out of the slot.
    • Remove the date and time battery holder by sliding it out of the slot.

  5. Remove the date and time battery from the battery holder.
    • Remove the date and time battery from the battery holder.

Sonuç

To reassemble your device, follow these instructions in reverse order.

4 farklı kişi bu kılavuzu tamamladı.

Doug Kruse

Üyelik tarihi: 03-09-2015

658 İtibar

3 adet Kılavuz yazıldı

Takım

USF Tampa, Team 12-3, Blackwell Fall 2015 USF Tampa, Team 12-3, Blackwell Fall 2015 üyesi

USFT-BLACKWELL-F15S12G3

4 Üyeler

6 adet Kılavuz yazıldı

Bir Yorum

Thank you. This is fantastic information that is *not* in the manual. I bought an unnecessary main battery, but this resuscitated my camera on a trip.

Thanks! David D.

David Drinkwater - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Past 24 Hours: 4

Past 7 Days: 18

Past 30 Days: 97

Her zaman: 4,386