Giriş

An Error 99 is an non specific error which means that camera doesn't know or have a code for the problem. In my case the shutter assembly needed replacing. This was a fairly involved process for a beginner such as myself.

This is not a comprehensive guide but should be used in conjunction with the Canon Service Manual and youtube videos. I hope that some of the pictures I took along the way might help you identify or remember how each step works.

Parçalar

Hiçbir parçaya gerek yok.

  1. Get the Canon 40D Service Repair Manual
    • Get the Canon 40D Service Repair Manual

    • Have a clean and organized workspace. I labelled plastic trays by step number and put all items for each step in a separate tray.

    • Watch a couple Youtube videos on this process

    Yorum Ekle

  2. Peel off rubber grips
    • Peel off rubber grips

    Yorum Ekle

    • take off front piece

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • take off rear

    • connectors disconnect by flipping black/brown tab up and sliding plastic tab out.

    Yorum Ekle

    • Take off top cover

    Yorum Ekle

    • take off bottom plate

    • disconnect and remove bottom board

    Yorum Ekle

    • remove CMOS assembly

    Yorum Ekle

    • remove metal back

    • remove and replace shutter assembly, transfering components that aren't on the new one

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 başka kişi bu kılavuzu tamamladı.

Bir Yorum

how do you replace the bridge (male portion on camera) other than putting the card in a card reader

wareibevictoriap - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 8

Son 30 Gün: 64

Her zaman: 4,200