Ana içeriğe geç

Giriş

The LP-E6 lithium battery is crucial to the operation of the Canon EOS 70D camera. Without the battery, the camera will not turn on. This guide will ensure you're able to properly replace the battery.

  1. Hold the camera with the lens pointing down. Press the highlighted button with your finger to release the cover.
    • Hold the camera with the lens pointing down. Press the highlighted button with your finger to release the cover.

    • Pull cover over to expose the battery.

  2. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  3. Press the white button with your finger to release the battery. Once released, the battery will eject out about two inches
    • Press the white button with your finger to release the battery.

    • Once released, the battery will eject out about two inches

  4. Pull battery out of the camera.
    • Pull battery out of the camera.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Paul

Üyelik tarihi: 12-03-2018

582 İtibar

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 5

Son 30 Gün: 37

Her zaman: 488