Ana içeriğe geç

Giriş

If your battery notch is stuck, or even broken, then follow this guide to replace the notch. All it takes is some hard work, a few tools, and the right attitude.

  1. Locate the side of camera with the HDMI port. Unscrew the 7mm with a #00 Phillips screw driver.
    • Locate the side of camera with the HDMI port.

    • Unscrew the 7mm with a #00 Phillips screw driver.

  2. Use your fingers to gently detach the plastic component from the camera Use your fingers to gently detach the plastic component from the camera
    • Use your fingers to gently detach the plastic component from the camera

  3. Unscrew the bottom three 4mm screws with a #00 Phillips screwdriver. Unscrew the bottom three 4mm screws with a #00 Phillips screwdriver. Unscrew the bottom three 4mm screws with a #00 Phillips screwdriver.
    • Unscrew the bottom three 4mm screws with a #00 Phillips screwdriver.

  4. Unscrew the inner 4mm screw with a #00 Phillips screwdriver.
    • Unscrew the inner 4mm screw with a #00 Phillips screwdriver.

  5. Unscrew the top 7mm screw on the right side of the camera. Unscrew the bottom 4 mm screw on the right side of the camera.
    • Unscrew the top 7mm screw on the right side of the camera.

    • Unscrew the bottom 4 mm screw on the right side of the camera.

  6. Use the plastic opening tool to pry open the entire back panel. Use your fingers to pull off the back panel. Use your fingers to pull off the back panel.
    • Use the plastic opening tool to pry open the entire back panel.

    • Use your fingers to pull off the back panel.

  7. Now that the panel is off, unscrew the 9mm screw holding the battery notch in. Use the pliers (or your fingers) to take off the white notch. There is a spring underneath the battery notch. Do not lose this spring or let it fall off.
    • Now that the panel is off, unscrew the 9mm screw holding the battery notch in.

    • Use the pliers (or your fingers) to take off the white notch.

    • There is a spring underneath the battery notch. Do not lose this spring or let it fall off.

Sonuç

To reassemble your device, follow these instructions in reverse order.

4 farklı kişi bu kılavuzu tamamladı.

Jonathan Lin

Üyelik tarihi: 14-04-2014

530 İtibar

4 adet Kılavuz yazıldı

Takım

Cal Poly, Team 3-41, Maness Spring 2014 Cal Poly, Team 3-41, Maness Spring 2014 üyesi

CPSU-MANESS-S14S3G41

4 Üyeler

5 adet Kılavuz yazıldı

0 Comments

Yorum Ekle

İstatistikleri Görüntüle:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 13

Her zaman: 2,026